3D print a building set from its set number
Type the number from the box and Brickalike gives you every part in the set, an STL print file for each part a home printer can make, and a shopping list for the rest. The print files are free and need no account.
How it works
- Type the set number: It is on the box and on the front of the instructions, for example 10698. Over 1,100 sets also show a 3D picture of the finished build.
- See what to print and what to buy: Every part is sorted: plain bricks, plates, tiles, slopes and beams usually print well; clear, printed, rubber, figure and electronic parts go on a shopping list you can upload to BrickLink.
- Download and print: Get one ZIP of print files sorted by colour, free. Pro adds print-ready plates (3MF) for a 256 mm bed, laid out one colour per plate, and a printing guide. Print the free fit test first, then pick your fit.
Tips for a better result
- Print the free fit test (ten small plates, marked 1 to 5 dots) before a big print.
- Choose your fit once and every download is made to match.
- Sort by colour and print one colour at a time.
- Check the parts list for spares and for parts you will have to buy.
Questions
Is it free?
Yes: the parts list, a print file for every printable part (in one ZIP by colour) and the shopping list are free, with no account. Pro adds print-ready plates and the printing guide.
Does it include the building instructions?
No. Use the instructions that came with your set.
Try it free, save the files with ProMake your next one
The parts list, a print file for every printable part and the shopping list are free. Print-ready plates and the printing guide are part of Brickalike Pro, a one-off €11.99 with secure checkout by Stripe. One Pro code works on up to 3 browsers at a time.
Pro Pro is active on this browser: every download is unlocked.
Look up a set, free