Brickalike Pro
Everything is free to try. Pro adds the files you keep: print-ready plates for any set, and print files, parts lists and a building manual for your own models.
€11.99 once · no subscription
Launch price until 5 November, then €59.99
Secure checkout by Stripe. VAT included where it applies. Use it on up to 3 browsers at a time (a new one replaces the oldest). Your code doesn’t expire. Email us within 14 days for a fix or a refund.
Printing a lot? A spare 0.4 mm nozzle, a brick separator and glue for structural parts on Amazon. We may earn a commission if you buy.
Already have a Pro code?
Pro You have Brickalike Pro on this browser.
Every download in the set tool and the scan builder is unlocked here. Your Pro code works on up to 3 browsers at a time: to add another, open any Pro button there and paste the code. Adding a 4th switches off the one you used longest ago, and you can switch it back with one tap.
What Pro adds
1 · Set tool
- Print-ready 3MF plates: the parts laid out for a 256 mm bed, one colour per plate, for Bambu Studio or OrcaSlicer
- Our printing guide: settings, a fit test, print order with tick boxes, and what to buy instead
2 · Camera scan
- The one-piece STL, at 100 mm, 150 mm or real brick size
- The brick kit: an STL of the separate bricks, and a list of what to print
- The building manual (PDF) and the step-by-step view
3 · Buy the bricks
- For scanned models: the parts list (CSV) and the BrickLink shopping list
- For sets these are already free
Free and Pro
| Feature | Free | Pro |
|---|---|---|
| Set tool | ||
| Parts list and print or buy for every part | ✓ | ✓ |
| An STL for every printable part, in one ZIP by colour | ✓ | ✓ |
| BrickLink shopping list and a link for each part | ✓ | ✓ |
| Print-ready 3MF plates (256 mm bed) | – | ✓ |
| Printing guide | – | ✓ |
| Camera scan | ||
| Scan, 3D brick model, brick count | ✓ | ✓ |
| Parts list on screen | ✓ | ✓ |
| One-piece STL and brick kit STL | – | ✓ |
| Building manual (PDF) and step-by-step view | – | ✓ |
| Buy the bricks | ||
| Shopping list for a set number | ✓ | ✓ |
| Parts list and shopping list for a scanned model | – | ✓ |
Questions about Pro
Is it a subscription?
No. You pay once. Your Pro code doesn’t expire. It only stops if the purchase is refunded.
How many devices can I use?
Up to 3 browsers at a time. After you pay, you see your Pro code: paste it on your other phone or computer. Using it on a 4th switches off the one you used longest ago; it can take Pro back with one tap. Lost your code? Email [email protected] with the email you paid with.
What if something goes wrong?
Email [email protected] within 14 days of buying and we will fix the problem or refund you. This doesn't affect your legal rights.
Do I need an account?
No. Pro is tied to the code, not to an account.
Is the "From one photo" AI route part of Pro?
No. That route uses an AI service with your own free account there. Pro covers the downloads once a model is made.