Troubleshooting 3D printed bricks
What went wrong, and what to change. Each fix uses the settings we publish on the print settings page, from tests on a Bambu P1S with a 0.4 mm nozzle.
Pick the fault
Three rules that save time
- Change one thing at a time.
- Test with a single piece before you print a plate.
- Dry filament and a clean plate fix more problems than any slicer setting.
Settings come from our own tests on one printer plus advice from other makers. If something works or fails on yours, tell us at hello@brickalike.com. Printed bricks are not toys: small parts, a choking hazard, not for children under 3.