BrickalikePRO

Buy printers + filament

The printers and plastics that print bricks well, with what each one is good for. Tap a card to see it on Amazon.

PrintersFilamentWhich one?Help

Printers

All of these print our STL files. Our ready-to-print set plates (3MF) are laid out for a 256 mm bed or an A1 mini (180 mm).

Good first printer

Bambu Lab A1 mini

Small, quiet and simple. A very popular first printer.

  • Print area 180 × 180 × 180 mm
  • Case Open frame
  • Colours 1, or 4 with the AMS lite (Combo)
  • Price Lower price

For bricks: Great for bricks. Pick "A1 mini" in the set tool and the plates are made to fit its smaller 180 mm plate.

See it on Amazon ↗Amazon link loading…
Good first printer

Bambu Lab A1

The full-size version of the A1 mini: a bigger plate, so fewer plates per set.

  • Print area 256 × 256 × 256 mm
  • Case Open frame
  • Colours 1, or 4 with the AMS lite (Combo)
  • Price Lower price

For bricks: Great for bricks in PLA. Open frame, so keep it out of draughts.

See it on Amazon ↗Amazon link loading…

Bambu Lab P1S

Enclosed and fast. The printer our set files are tested on.

  • Print area 256 × 256 × 256 mm
  • Case Enclosed
  • Colours 1, or 4 with the AMS (up to 16 with four)
  • Price Mid price

For bricks: Our ready-to-print plate files (3MF) are set up for it. The case also helps with PETG.

See it on Amazon ↗Amazon link loading…

Bambu Lab P2S

The newer P1S: same size plate, quieter, with a touch screen and a camera.

  • Print area 256 × 256 × 256 mm
  • Case Enclosed
  • Colours 1, or 4 with the AMS 2 Pro (Combo)
  • Price Mid price

For bricks: Prints our set plates the same as the P1S.

See it on Amazon ↗Amazon link loading…

Bambu Lab H2S

A large enclosed printer with one nozzle.

  • Print area 340 × 320 × 340 mm
  • Case Enclosed
  • Colours 1, or 4 and more with the AMS
  • Price Higher price

For bricks: The big plate fits many more bricks, so a whole set needs fewer plates.

See it on Amazon ↗Amazon link loading…

Bambu Lab H2D

Two nozzles in one large enclosed printer. For people who print a lot.

  • Print area 325 × 320 × 325 mm
  • Case Enclosed
  • Colours 2 nozzles, more with the AMS
  • Price Higher price

For bricks: Two nozzles waste less plastic on colour changes in multi-colour models.

See it on Amazon ↗Amazon link loading…

Elegoo Centauri Carbon

An enclosed, fast printer at a low price.

  • Print area 256 × 256 × 256 mm
  • Case Enclosed
  • Colours 1 as standard
  • Price Lower price

For bricks: Good for bricks. Our 256 mm set plates fit its bed; open them in its own slicer.

See it on Amazon ↗Amazon link loading…

Creality K1C

A compact enclosed printer that prints fast.

  • Print area 220 × 220 × 250 mm
  • Case Enclosed
  • Colours 1 as standard
  • Price Mid price

For bricks: Good for bricks. Its plate is 220 mm, so choose the A1 mini (180 mm) plates for set files, or use the STL files.

See it on Amazon ↗Amazon link loading…

Anycubic Kobra 3 Combo

An open printer that comes with a 4-colour box.

  • Print area 250 × 250 × 260 mm
  • Case Open frame
  • Colours 4 with the ACE Pro box (in the Combo)
  • Price Mid price

For bricks: Multi-colour models without buying a colour box on its own. Its plate is 250 mm, so use the STL files or the A1 mini plates.

See it on Amazon ↗Amazon link loading…

Creality Ender-3 V3 SE

One of the cheapest good printers. Slower, and more to learn.

  • Print area 220 × 220 × 250 mm
  • Case Open frame
  • Colours 1
  • Price Lower price

For bricks: Prints bricks fine once it is tuned. Print one test brick first. Choose the A1 mini (180 mm) plates for set files.

See it on Amazon ↗Amazon link loading…

Filament

Buy 1.75 mm filament: it is what all of the printers above take. One 1 kg spool prints a few hundred small bricks.

Best for bricks

PLA

Cheap, easy and stiff. The plastic most printed bricks are made from.

For bricks: Grips tightly. Start here.

See it on Amazon ↗Amazon link loading…
Best look

Matte PLA

PLA with a flat, non-shiny finish.

For bricks: Hides layer lines, so bricks look closer to the real thing.

See it on Amazon ↗Amazon link loading…
Many colours

PLA colour pack

Several smaller spools in different colours.

For bricks: Handy for sets with lots of colours, where you only need a little of each.

See it on Amazon ↗Amazon link loading…
Tougher

PLA+ (tougher PLA)

PLA mixed to be less brittle.

For bricks: Good for pins, axles and thin parts that snap in plain PLA.

See it on Amazon ↗Amazon link loading…
Strong

PETG

Tougher than PLA and bends before it breaks. Strings a little more.

For bricks: Grips a little looser than PLA. Print the Fit test first.

See it on Amazon ↗Amazon link loading…
See-through parts

Clear PETG

See-through plastic for windows, lights and screens.

For bricks: Prints frosted, not glass-clear. Good for the clear parts on a set's buy list.

See it on Amazon ↗Amazon link loading…
Rubbery

TPU 95A (flexible)

Soft, bendy plastic.

For bricks: For tyres and other rubber parts. Print it slowly, and feed it straight in, not through a colour box (AMS).

See it on Amazon ↗Amazon link loading…
Display only

Silk PLA

Very shiny PLA in metal-like colours.

For bricks: Lovely on display models, but weaker and looser: not for bricks you clip together.

See it on Amazon ↗Amazon link loading…
Keeps it dry

Filament dryer

A warm box that dries a spool while you print from it.

  • Works with any 1.75 mm spool

For bricks: Damp plastic causes strings and rough studs, most of all PETG and TPU.

See it on Amazon ↗Amazon link loading…

Which one should I get?

Need help?

Not sure which printer or plastic to get, or something went wrong with a print? Send us a message and we will help.

Details are from the makers' own published specs (November 2026). Prices change all the time, so we show only a rough price band: check the price on Amazon. We are not linked to any printer or filament brand.

Printed bricks are not toys: small parts, a choking hazard, not for children under 3.