BrickalikePRO
lord_edel on Printables
We don’t copy designers’ photos. See the photos and makes on Printables ↗

Home & living · By lord_edel on Printables

Simple yet elegant toothbrush holder

Commercial printing permittedAttribution required

Toothbrush holder by lord_edel on Printables (2.7k downloads, 421 likes, 40 makes). The licence allows selling prints.

Print time
20 min
Filament
2 g
Material cost
€0.04
Sells for
€3–6
Gross profit
€3.93
Margin
87.6%

At €4.49, PLA at €20/kg, Irish electricity, €0.50 packaging, selling in person. Change them in the calculator.

The file stays on the designer’s page: we link to it and never copy it.

Own original. Very cheap to make. From the designer’s page: 20 min, 0.15 mm, PLA 2 g, 15% gyroid; adhesive-tape or screw versions.

Print time
20 min
Filament
2 g
Recommended filament
PLA
Supports
None needed
Difficulty
Easy

From the designer’s page.

Licence: Creative Commons Attribution (CC BY)

Commercial printing permittedAttribution required

  • You may sell printed copies
  • Credit the designer when you sell (in the listing or on a card)
  • You may change the design
  • Download it from the designer’s own page

You may print and sell it, and change it, if you credit the designer. Read the licence ↗

Credit line to copy: Design: “Simple yet elegant toothbrush holder/ hanger” by lord_edel (Printables), Creative Commons Attribution (CC BY).

Licence checked on the designer’s page on 17 Nov 2026. Designers can change licences for new downloads: look again before a big batch.

Etsy: since June 2025 Etsy only allows 3D-printed items made from the seller’s own design, so do not list prints of this file there. Craft markets, local shops, your own website, social media and other marketplaces such as eBay are fine where the licence allows selling.

Profit calculator

Change any number and the answer updates. Your filament price, power and platform are remembered on this browser.

This product
Your costs

Gross profit per item€3.93Margin 87.6% · €11.80 per printer hour

Filament€0.04
Electricity€0.01
Packaging€0.50
Extra parts€0.00
Selling fees€0.00
Total cost per item€0.56
SellGross profitPrinter timeFilament
10€39.303.3 h0 kg
25€98.258.3 h0.1 kg
50€196.5016.7 h0.1 kg
100€393.0033.3 h0.2 kg

Gross profit is the price minus the costs above. It is not take-home pay: it leaves out tax and VAT, your time, the printer itself, stall rent, postage you don’t charge for and anything you don’t sell. Prices are estimates, not sales data.

Sell it

Suggested price €3–6 Brickalike’s estimate

On Printables: 2.7k downloads, 421 likes, 40 makes (people who posted a photo of their print) (checked 17 Nov 2026).

Listing updated 17 Nov 2026. Prices and trends are research, not sales data. Spotted a mistake or a licence change? Tell us.