Workshop & tools · By RIP_Plo-Koon on Printables
Gridfinity Magnet Light Baseplate
Commercial printing permittedAttribution required
Gridfinity baseplate by RIP_Plo-Koon on Printables (27k downloads, 3.5k likes, 203 makes). The licence allows selling prints.
- Print time
- 2 h 30 min
- Filament
- 60 g
- Material cost
- €1.26
- Sells for
- €8–15
- Gross profit
- €8.83
- Margin
- 76.9%
At €11.49, PLA at €20/kg, Irish electricity, €0.50 packaging, selling in person. Change them in the calculator.
The file stays on the designer’s page: we link to it and never copy it.
Needs magnets. Based on Zack Freedman's Gridfinity baseplates. From the designer’s page: No brims or support required.
Print it
- Print time
- 2 h 30 min
- Filament
- 60 g
- Recommended filament
- PLA
- Supports
- None needed
- Difficulty
- Easy
Brickalike’s estimate from the size of the model; slice it to check.
Licence: Creative Commons Attribution (CC BY)
Commercial printing permittedAttribution required
- You may sell printed copies
- Credit the designer when you sell (in the listing or on a card)
- You may change the design
- Download it from the designer’s own page
You may print and sell it, and change it, if you credit the designer. Read the licence ↗
Credit line to copy: Design: “Gridfinity Magnet Light Baseplate” by RIP_Plo-Koon (Printables), Creative Commons Attribution (CC BY).
Licence checked on the designer’s page on 17 Nov 2026. Designers can change licences for new downloads: look again before a big batch.
Etsy: since June 2025 Etsy only allows 3D-printed items made from the seller’s own design, so do not list prints of this file there. Craft markets, local shops, your own website, social media and other marketplaces such as eBay are fine where the licence allows selling.
Profit calculator
Change any number and the answer updates. Your filament price, power and platform are remembered on this browser.
Gross profit per item€8.83Margin 76.9% · €3.53 per printer hour
| Filament | €1.26 |
|---|---|
| Electricity | €0.10 |
| Packaging | €0.50 |
| Extra parts | €0.80 |
| Selling fees | €0.00 |
| Total cost per item | €2.66 |
| Sell | Gross profit | Printer time | Filament |
|---|---|---|---|
| 10 | €88.30 | 25 h | 0.6 kg |
| 25 | €220.75 | 62.5 h | 1.6 kg |
| 50 | €441.50 | 125 h | 3.2 kg |
| 100 | €883.00 | 250 h | 6.3 kg |
Gross profit is the price minus the costs above. It is not take-home pay: it leaves out tax and VAT, your time, the printer itself, stall rent, postage you don’t charge for and anything you don’t sell. Prices are estimates, not sales data.
Sell it
Suggested price €8–15 Brickalike’s estimate
On Printables: 27k downloads, 3.5k likes, 203 makes (people who posted a photo of their print) (checked 17 Nov 2026).
Listing updated 17 Nov 2026. Prices and trends are research, not sales data. Spotted a mistake or a licence change? Tell us.