Home / Parts / 1872
Part 1872 (1872): free STL file
A print file for part 1872, Part 1872: a generic shape you can print at home as a spare for a missing or broken piece. Free.
Part number 1872
Name Part 1872
Size 15 × 4.2 × 15 mm
Opens the set tool with this part, where the STL is made on your own phone or computer.
Need filament? Find PLA on Amazon . We may earn a commission if you buy.
Found in these sets
None of the sets on Brickalike uses it, but you can still print it. Browse sets .
Before you print a lot
Printed parts don’t clip together as tightly as moulded ones. Print one and test the fit first.
This part stands on a very small base (a first layer of under 5 mm2, or under 15 mm2 for a tall part): turn on a brim in your slicer so it does not come loose or topple.For this single file, turn on your slicer’s automatic supports (Bambu Studio: Support > Enable support, “tree(auto)”). They only appear where an overhang needs them. On the kit’s plates leave supports off, unless the plate is named “-needs-supports”. Some round parts of this one (studs, pins or pin holes) lie on their side when printed, so they come out slightly oval. Print one and test the fit first.
The Fit setting changes studs and the holes that grip them only. Pins, axles and other round parts are not adjusted.
Your slicer and printer settings change the fit: a small scale change (99–101%) often helps.
The file is one colour. Print it in the colour you need.
Missing more than one piece?
Type the number of a set you own to see its parts list, with a print file for each generic part, sorted by colour, and a shopping list for the specialist parts.
Pro adds print-ready plates of your spare parts for a 256 mm bed or an A1 mini (180 mm). About Pro
Open the spare-parts tool
Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable . Browse all parts . Independent project, not sponsored, authorised or endorsed by any brick company.