Hinge Bar with 3 Fingers and End Stud (Control Lever) (2433): free STL file
A print file for part 2433, Hinge Bar with 3 Fingers and End Stud (Control Lever), ready for your 3D printer. Free, no account.
- Part number
- 2433
- Name
- Hinge Bar with 3 Fingers and End Stud (Control Lever)
- Kind
- Hinges, Arms and Turntables
- Size
- 6.4 × 8 × 17.6 mm
Opens the set tool with this part, where the STL is made on your own phone or computer.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
Used in these sets
The 30 sets that use it most, of 47 on Brickalike. Each set page has the full parts list and print files.
- 4563 Load and Haul Railroad × 8
- 6352 Cargomaster Crane × 4
- 6451 River Response × 3
- 6479 Emergency Response Center × 3
- 6919 Planetary Prowler × 2
- 1787 Crater Cruiser × 2
- 6596 Wave Master × 2
- 4544 Car Transport Wagon with Car × 2
- 6348 Surveillance Squad × 2
- 6537 Hydro Racer × 2
- 6939 Saucer Centurion × 2
- 1969 Mini Robot × 2
- 6898 Ice-Sat V × 2
- 6983 Ice Station Odyssey × 2
- 1462 Galactic Scout × 2
- 6984 Galactic Mediator × 2
- 1479 2-Pilot Craft × 2
- 4543 Railroad Tractor Flatbed × 2
- 1875 Meteor Monitor × 2
- 6989 Mega Core Magnetizer × 2
- 6955 Space Lock-Up Isolation Base × 2
- 6770 Lunar Transporter Patroller × 2
- 6828 Twin-Winged Spoiler × 2
- 6875 Hovercraft × 2
- 6876 Alienator × 2
- 6827 Strata Scooter × 2
- 6893 Orion II Hyperspace × 2
- 6472 Gas N' Wash Express × 1
- 6462 Aerial Recovery × 1
- 6553 Crisis News Crew × 1
Printing a whole set?
Type a set number in the set tool to get an STL for every printable part at once, sorted by colour, plus a shopping list for the rest.
Open the set toolPro adds print-ready plates for a 256 mm bed, in the set tool. About Pro
Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable. Browse all parts. Independent project, not sponsored, authorised or endorsed by any brick company.