Saucer Centurion (6939): parts list and STL files

Set 6939, Saucer Centurion, from 1994, has 222 pieces in 79 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Saucer Centurion, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Damien Roux (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

152to print

70to buy

0spares

79kinds

152 to print, 70 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 6939

Parts in set 6939, Saucer Centurion
Colour	Part	Qty	Print or buy
Black	3023 Plate 1 x 2	12	Print
Red	2412b Tile Special 1 x 2 Grille with Bottom Groove	10	Print
Red	3023 Plate 1 x 2	9	Print
Black	3022 Plate 2 x 2	7	Print
Black	3021 Plate 2 x 3	6	Print
Black	2431 Tile 1 x 4 with Groove	5	Print
Red	3941 Brick Round 2 x 2 with Axle Hole	5	Print
Red	2401 Wedge Plate 10 x 10 with 4x4 Cutout and Cut Corner	4	Print
Black	2401 Wedge Plate 10 x 10 with 4x4 Cutout and Cut Corner	4	Print
Red	3297 Brick Sloped 33° 3 x 4	4	Print
Black	3700 Brick 1 x 2 [1 Pin Hole]	4	Print
Black	3795 Plate 2 x 6	4	Print
Black	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	4	Print
Black	4600 Plate Special 2 x 2 with Wheel Holders	4	Print
Black	3039 Brick Sloped 45° 2 x 2	3	Print
Black	2419 Wedge Plate 3 x 6 Cut Corners	2	Print
Black	2433 Hinge Bar with 3 Fingers and End Stud (Control Lever)	2	Print
Black	2452 Hinge Plate 1 x 2 with 3 Fingers On Side	2	Print
Black	2540 Plate Special 1 x 2 Side Handle [Free Ends]	2	Print
Black	2555 Tile Special 1 x 1 with Clip and Straight Tips	2	Print
Black	2923 Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder)	2	Print
Red	3008 Brick 1 x 8	2	Print
Black	3020 Plate 2 x 4	2	Print
Black	3069b Tile 1 x 2 with Groove	2	Print
Black	3660 Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]	2	Print
Light Gray	3673 Pin without Friction Ridges Lengthwise	2	Print
Black	3710 Plate 1 x 4	2	Print
Red	3710 Plate 1 x 4	2	Print
Black	3794a Plate Special 1 x 2 with 1 Stud without Groove (Jumper)	2	Print
Red	3795 Plate 2 x 6	2	Print
Red	3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]	2	Print
Black	3941 Brick Round 2 x 2 with Axle Hole	2	Print
Red	3942c Cone 2 x 2 x 2, Open Stud	2	Print
Black	3942c Cone 2 x 2 x 2, Open Stud	2	Print
Black	3956 Bracket 2 x 2 - 2 x 2	2	Print
Black	4081b Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]	2	Print
Red	4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs	2	Print
Black	4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs	2	Print
Red	4315 Hinge Vehicle Roof Holder 1 x 4	2	Print
Black	4519 Axle 3	2	Print
Black	4596 Plate Special 1 x 2 with Long Stud Receptacle (Space Wing)	2	Print
Black	6019 Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]	2	Print
Red	6061b Brick 2 x 4 x 2 with Holes on Sides, Reinforced Supports between Tubes	2	Print
Black	6111 Brick 1 x 10	2	Print
Red	2350b Crane Arm Outside, Wide, 15 Studs, End Notch	1	Print
Black	2351 Crane Arm Centre, 16 x 2 x 1	1	Print
Black	3004 Brick 1 x 2	1	Print
Red	3029 Plate 4 x 12	1	Print
Black	3034 Plate 2 x 8	1	Print
Black	3666 Plate 1 x 6	1	Print
Black	4162 Tile 1 x 8 with Groove	1	Print
Black	4623 Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]	1	Print
Black	4732 Bracket 8 x 2 x 1 1/3	1	Print
Black	3475b Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders]	8	Buy
Black	3641 Tyre 15 x 6 Offset Tread Small	8	Buy
Light Gray	4624 Wheel 8 x 6	8	Buy
Trans-Dark Blue	4589 Cone 1 x 1 [No Top Groove]	6	Buy
Trans-Dark Blue	6141 Plate Round 1 x 1 with Solid Stud	6	Buy
Red	2340 Wing, Tail 4 x 1 x 3	4	Buy
Trans-Dark Blue	2569 Antenna 8H Whip	4	Buy
Black	3068bpr0059 Tile 2 x 2 with Blue Screen, Silver and Red Panel Print	3	Buy
Trans-Dark Blue	2507 Windscreen 10 x 4 x 2 1/3 Canopy	2	Buy
Black	3069bpr0038 Tile 1 x 2 with Arrow Short Yellow without Black Border Print	2	Buy
Red	3479 Tail 4 x 2 x 2	2	Buy
Trans-Dark Blue	4740 Dish 2 x 2 Inverted [Radar]	2	Buy
Trans-Neon Green	4740 Dish 2 x 2 Inverted [Radar]	2	Buy
Black	2516 Tool Chainsaw / Drill Body	1	Buy
Black	3039pr9973 Brick Sloped 45° 2 x 2 with Horizon Screen Print	1	Buy
Black	6140 Bar 1 x 6 [Closed Studs]	1	Buy
Red	2446 Helmet, Standard	1	Buy
Trans-Neon Green	2447 Headwear Accessory Visor For Standard Helmet	1	Buy
Yellow	3626bpr0020 Minifig Head, Headband Blue with Eyebrows Print	1	Buy
Black	3838 Minifig Neckwear Airtanks	1	Buy
Red	970c03 Hips and Black Legs	1	Buy
Blue	973c03h22pr0066 Torso, Spacesuit Spyrius Print, Black Arms, Red Hands	1	Buy
Trans-Clear	2446 Helmet, Standard	1	Buy
Black	3626bpr0023 Minifig Head Time Cruisers Robot / Spyrius Droid, Silver Eyes and Circuitry Print [Blocked Open Stud]	1	Buy
Red	970c22pr0019 Hips and Red Legs with Silver and Black Robot Print	1	Buy
Red	973c03h22pr0063 Torso, Robot Print (Spyrius), Black Arms, Red Hands	1	Buy

Print set 6939 at home

The set tool makes an STL file for each of the 152 printable pieces, sorted by colour, plus a shopping list for the 70 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.