Alienator (6876): parts list and STL files
Set 6876, Alienator, from 1988, has 92 pieces in 52 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
75 to print, 17 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 6876
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| Light Gray | 3679 Turntable 2 x 2 Plate - Top | 6 | |
| Yellow | 3680 Turntable 2 x 2 Plate, Base | 6 | |
| Black | 3940b Support Round 2 x 2 x 2 Stand with Reach-Through Center Hole | 4 | |
| Black | 4085b Plate Special 1 x 1 with Clip Vertical [Thin U Clip] | 4 | |
| Black | 3034 Plate 2 x 8 | 3 | |
| Black | 3069b Tile 1 x 2 with Groove | 3 | |
| Black | 2345 Panel 3 x 3 x 6 Corner Wall | 2 | |
| Black | 2433 Hinge Bar with 3 Fingers and End Stud (Control Lever) | 2 | |
| Black | 298c01 Lever Small Base with Yellow Lever | 2 | |
| Yellow | 3023 Plate 1 x 2 | 2 | |
| Black | 3024 Plate 1 x 1 | 2 | |
| Black | 3039 Brick Sloped 45° 2 x 2 | 2 | |
| Black | 3040b Brick Sloped 45° 2 x 1 with Bottom Pin | 2 | |
| Black | 3062b Brick Round 1 x 1 Open Stud | 2 | |
| Black | 3941 Brick Round 2 x 2 with Axle Hole | 2 | |
| Black | 4275b Hinge Plate 1 x 2 with 3 Fingers [Hollow Studs] | 2 | |
| Black | 4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs | 2 | |
| Black | 4531 Hinge Tile 1 x 2 1/2 with 2 Fingers on Top | 2 | |
| Black | 4588 Brick Round 1 x 1 with Fins, Open Stud | 2 | |
| Black | 4590 Plate Special 1 x 4 Offset with Bar Holes | 2 | |
| Black | 4595 Brick Special 1 x 2 x 2/3 with Studs on Sides | 2 | |
| Black | 4730 Brick Special 2 x 2 with Pin and No Axle Hole | 2 | |
| Yellow | 6141 Plate Round 1 x 1 with Solid Stud | 2 | |
| Black | 3003 Brick 2 x 2 | 1 | |
| Black | 3004 Brick 1 x 2 | 1 | |
| Black | 3020 Plate 2 x 4 | 1 | |
| Black | 3021 Plate 2 x 3 | 1 | |
| Black | 3023 Plate 1 x 2 | 1 | |
| Black | 3035 Plate 4 x 8 | 1 | |
| Black | 3660 Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] | 1 | |
| Black | 3701 Brick 1 x 4 [3 Pin Holes] | 1 | |
| Black | 3795 Plate 2 x 6 | 1 | |
| Black | 3832 Plate 2 x 10 | 1 | |
| Black | 3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 1 | |
| Black | 3937 Hinge Brick 1 x 2 Base | 1 | |
| Black | 3938 Hinge Brick 1 x 2 Top Plate Thin | 1 | |
| Black | 4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 1 | |
| Black | 4871 Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed | 1 | |
| Yellow | 3957a Antenna 1 x 4 with Rounded Top | 2 | Buy |
| Trans-Red | 4740 Dish 2 x 2 Inverted [Radar] | 2 | Buy |
| Trans-Red | 6141 Plate Round 1 x 1 with Solid Stud | 2 | Buy |
| Trans-Yellow | 2466 Panel 3 x 2 x 6 | 1 | Buy |
| Black | 3933a Wedge, Plate 8 x 4 Wing Left without Underside Stud Notch | 1 | Buy |
| Black | 3934a Wedge Plate 8 x 4 Wing Right without Stud Notch | 1 | Buy |
| Yellow | 3959 Weapon Gun / Torch (Space) [with Grooves] | 1 | Buy |
| Yellow | 4735 Bar 1 x 3 [Clip / Anti-Stud] | 1 | Buy |
| Black | 2446 Helmet, Standard | 1 | Buy |
| Black | 2447 Headwear Accessory Visor For Standard Helmet | 1 | Buy |
| Yellow | 3626apr0001 Minifig Head Standard Grin Print [Solid Stud] | 1 | Buy |
| Black | 3838 Minifig Neckwear Airtanks | 1 | Buy |
| Black | 970c03 Hips and Black Legs | 1 | Buy |
| Black | 973c03h03pr0052 Torso, Space Suit, Blacktron I Print, Black Arms and Hands | 1 | Buy |
Print set 6876 at home
The set tool makes an STL file for each of the 75 printable pieces, sorted by colour, plus a shopping list for the 17 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.