Speedway Bandit (8815): parts list and STL files
Set 8815, Speedway Bandit, from 1991, has 78 pieces in 43 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
60 to print, 18 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 8815
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| Black | 3705 Axle 4 | 5 | |
| Red | 3894 Brick 1 x 6 [5 Pin Holes] | 4 | |
| Light Gray | 4265a Bush 1/2 Toothed Type I [+ Opening] | 4 | |
| Light Gray | 3713 Bush | 3 | |
| Red | 3738 Plate 2 x 8 [7 Holes] | 3 | |
| Red | 2450 Wedge Plate 3 x 3 Cut Corner | 2 | |
| Red | 3023 Plate 1 x 2 | 2 | |
| Red | 3040b Brick Sloped 45° 2 x 1 with Bottom Pin | 2 | |
| Red | 3700 Brick 1 x 2 [1 Pin Hole] | 2 | |
| Red | 3702 Brick 1 x 8 [7 Pin Holes] | 2 | |
| Light Gray | 3749 Axle Pin without Friction Ridges Lengthwise | 2 | |
| Light Gray | 4261 Steering Arm | 2 | |
| Light Gray | 2420 Plate 2 x 2 Corner | 1 | |
| Black | 2717 Seat / Chair [3 x 2 Base] | 1 | |
| Black | 2780 Pin with Friction Ridges Lengthwise and Center Slots | 1 | |
| Light Gray | 2790 Steering Rack | 1 | |
| Light Gray | 2791 Steering Gear Holder | 1 | |
| Black | 2792 Steering Rack Top - Modified 1 x 8 Plate with Toothed Ends | 1 | |
| Light Gray | 2850a Engine Cylinder with Side Slots | 1 | |
| Dark Gray | 2851 Engine Piston Round | 1 | |
| Light Gray | 2852 Engine Connecting Rod | 1 | |
| Light Gray | 2853 Engine Crankshaft | 1 | |
| Red | 3021 Plate 2 x 3 | 1 | |
| Red | 3022 Plate 2 x 2 | 1 | |
| Black | 3023 Plate 1 x 2 | 1 | |
| Light Gray | 3023 Plate 1 x 2 | 1 | |
| Light Gray | 3062b Brick Round 1 x 1 Open Stud | 1 | |
| Light Gray | 3647 Gear 8 Tooth | 1 | |
| Light Gray | 3673 Pin without Friction Ridges Lengthwise | 1 | |
| Red | 3701 Brick 1 x 4 [3 Pin Holes] | 1 | |
| Black | 3706 Axle 6 | 1 | |
| Red | 3710 Plate 1 x 4 | 1 | |
| Black | 3737 Axle 10 | 1 | |
| Red | 3937 Hinge Brick 1 x 2 Base | 1 | |
| Red | 3938 Hinge Brick 1 x 2 Top Plate Thin | 1 | |
| Light Gray | 4070 Brick Special 1 x 1 with Headlight | 1 | |
| Light Gray | 4274 Pin 1/2 without Friction Ridges | 1 | |
| Black | 4442 Plate 1 x 8 with Toothed Ends | 1 | |
| Light Gray | 4589 Cone 1 x 1 [No Top Groove] | 1 | |
| White | 3482 Wheel with Split Axle hole | 8 | Buy |
| Black | 3483 Tyre Offset Tread 24 x 8 | 8 | Buy |
| White | 3068bpr0078 Tile 2 x 2 with Number 1 Print | 1 | Buy |
| Light Gray | 4185 Wedge Belt Wheel [aka Pulley] | 1 | Buy |
Print set 8815 at home
The set tool makes an STL file for each of the 60 printable pieces, sorted by colour, plus a shopping list for the 18 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.