Pin with Friction Ridges Lengthwise and Center Slots (2780): free STL file
A print file for part 2780, Pin with Friction Ridges Lengthwise and Center Slots, ready for your 3D printer. Free, no account.
- Part number
- 2780
- Name
- Pin with Friction Ridges Lengthwise and Center Slots
- Kind
- Pins
- Size
- 16 × 6.4 × 6.2 mm
Opens the set tool with this part, where the STL is made on your own phone or computer.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
Used in these sets
The 30 sets that use it most, of 266 on Brickalike. Each set page has the full parts list and print files.
- 42055 Bucket Wheel Excavator × 724
- 42082 Rough Terrain Crane × 613
- 8258 Crane Truck × 346
- 41999 4 x 4 Crawler Exclusive Edition × 344
- 42069 Extreme Adventure × 303
- 8285 Tow Truck × 296
- 42070 6x6 All Terrain Tow Truck × 261
- 42039 24 Hours Race Car × 241
- 42108 Mobile Crane × 223
- 42068 Airport Rescue Vehicle × 221
- 42064 Ocean Explorer × 216
- 42066 Air Race Jet × 214
- 31203 World Map × 206
- 42029 Customized Pick up Truck × 204
- 9397 Logging Truck × 191
- 42000 Grand Prix Racer × 190
- 42077 Rally Car × 186
- 42042 Crawler Crane × 185
- 42052 Heavy Lift Helicopter × 184
- 8448 Super Street Sensation × 179
- 51515 Robot Inventor × 175
- 9396 Helicopter × 174
- 42076 Hovercraft × 168
- 8063 Tractor with Trailer × 164
- 42112 Cement Mixer × 161
- 10276 Colosseum × 158
- 8275 Motorized Bulldozer × 156
- 42099 4x4 X-treme Off-Roader × 144
- 42038 Arctic Truck × 136
- 42041 Race Truck × 127
Printing a whole set?
Type a set number in the set tool to get an STL for every printable part at once, sorted by colour, plus a shopping list for the rest.
Open the set toolPro adds print-ready plates for a 256 mm bed, in the set tool. About Pro
Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable. Browse all parts. Independent project, not sponsored, authorised or endorsed by any brick company.