Wind Turbine Transport (7747): parts list and STL files

Set 7747, Wind Turbine Transport, from 2009, has 444 pieces in 158 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Wind Turbine Transport, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Marc Giraudet (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

358to print

86to buy

13spares

158kinds

358 to print, 86 to buy, 13 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 7747

Parts in set 7747, Wind Turbine Transport
Colour	Part	Qty	Print or buy
Light Bluish Gray	3023 Plate 1 x 2	13	Print
Light Bluish Gray	4488 Plate Special 2 x 2 with Wheel Holder	12	Print
Red	3004 Brick 1 x 2	10	Print
White	85941 Cylinder Half 2 x 4 x 5 with 1 x 2 cutout	10	Print
White	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	9	Print
Black	3020 Plate 2 x 4	8	Print
Yellow	3021 Plate 2 x 3	8	Print
Dark Bluish Gray	2412b Tile Special 1 x 2 Grille with Bottom Groove	7	Print
White	2431 Tile 1 x 4 with Groove	7	Print
Yellow	3010 Brick 1 x 4	6	Print
Dark Bluish Gray	3034 Plate 2 x 8	6	Print
White	30414 Brick Special 1 x 4 with 4 Studs on One Side	6	Print
Black	32028 Plate Special 1 x 2 with Door Rail	6	Print
Yellow	4623 Plate Special 1 x 2 with Bar Up [Horizontal Arm 6mm]	6	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	6	Print
Light Bluish Gray	3795 Plate 2 x 6	5	Print
White	6179 Plate Special 4 x 4, Studs on One Edge Plain]	5	Print
Red	2412b Tile Special 1 x 2 Grille with Bottom Groove	4	Print
Black	2780 Pin with Friction Ridges Lengthwise and Center Slots	4	Print
Green	3005 Brick 1 x 1	4	Print
White	3020 Plate 2 x 4	4	Print
Light Bluish Gray	3024 Plate 1 x 1	4	Print
Light Bluish Gray	32064b Brick 1 x 2 with Axle Hole Type 2 [X Opening]	4	Print
Red	32449 Beam 1 x 4 Thin	4	Print
Red	3245b Brick 1 x 2 x 2 with Inside Axle Holder	4	Print
Green	3297 Brick Sloped 33° 3 x 4	4	Print
Red	3660 Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]	4	Print
Light Bluish Gray	3666 Plate 1 x 6	4	Print
Light Bluish Gray	3701 Brick 1 x 4 [3 Pin Holes]	4	Print
Light Bluish Gray	4162 Tile 1 x 8 with Groove	4	Print
Red	4532 Cupboard 2 x 3 x 2 with Solid Studs	4	Print
Dark Bluish Gray	4533 Cupboard 2 x 3 x 2 Door	4	Print
White	60474 Plate Round 4 x 4 with Pin Hole	4	Print
White	6081 Brick Curved 2 x 4 x 1 1/3	4	Print
White	6091 Brick Curved 1 x 2 x 1 1/3 with Curved Top	4	Print
Dark Bluish Gray	61409 Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate	4	Print
Dark Bluish Gray	6587 Axle 3 with Stud	4	Print
Red	2431 Tile 1 x 4 with Groove	3	Print
Yellow	3022 Plate 2 x 2	3	Print
Red	3023 Plate 1 x 2	3	Print
Black	30541 Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End	3	Print
Dark Bluish Gray	3068b Tile 2 x 2 with Groove	3	Print
Red	3710 Plate 1 x 4	3	Print
White	3710 Plate 1 x 4	3	Print
Red	3795 Plate 2 x 6	3	Print
Blue	3941 Brick Round 2 x 2 with Axle Hole	3	Print
Red	3958 Plate 6 x 6	3	Print
Red	43337 Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]	3	Print
Dark Bluish Gray	44300 Hinge Tile 1 x 3 Locking with 1 Finger on Top	3	Print
Black	44302a Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth	3	Print
White	47397 Wedge Plate 12 x 3 Left	3	Print
Yellow	52107 Brick Special 1 x 2 with Studs on 2 Sides	3	Print
White	62743 Plate Special 2 x 16 with Angled Side Extensions and Hole (Rotor Blade)	3	Print
Black	2412b Tile Special 1 x 2 Grille with Bottom Groove	2	Print
Dark Bluish Gray	2877 Brick Special 1 x 2 with Grille	2	Print
Dark Bluish Gray	30000 Brick Special 2 x 2 with 2 Pins and Axle Hole	2	Print
Yellow	3004 Brick 1 x 2	2	Print
Yellow	3005 Brick 1 x 1	2	Print
Dark Bluish Gray	3009 Brick 1 x 6	2	Print
Green	3022 Plate 2 x 2	2	Print
Bright Green	3028 Plate 6 x 12	2	Print
Light Bluish Gray	3032 Plate 4 x 6	2	Print
Red	3069b Tile 1 x 2 with Groove	2	Print
White	3069b Tile 1 x 2 with Groove	2	Print
Light Bluish Gray	32000 Brick 1 x 2 [2 Pin Holes]	2	Print
Red	32009 Beam 1 x 11.5 Double Bent Thick	2	Print
Red	32059 Wedge Plate 4 x 6 Cut Corners	2	Print
Yellow	32123b Bush 1/2 Smooth with Axle Hole Semi-Reduced	2	Print
Black	32278 Beam 1 x 15 Thick	2	Print
White	3460 Plate 1 x 8	2	Print
Yellow	3665 Brick Sloped Inverted 45° 2 x 1	2	Print
Black	3702 Brick 1 x 8 [7 Pin Holes]	2	Print
Green	3795 Plate 2 x 6	2	Print
Red	3821 Door 1 x 3 x 1 Right	2	Print
Red	3822 Door 1 x 3 x 1 Left	2	Print
Black	4085c Plate Special 1 x 1 with Clip Vertical [Thick U Clip]	2	Print
Blue	43093 Axle Pin with Friction Ridges Lengthwise	2	Print
Yellow	43337 Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]	2	Print
Yellow	45677 Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs	2	Print
Black	48336 Plate Special 1 x 2 [Side Handle Closed Ends]	2	Print
White	4865a Panel 1 x 2 x 1 [Square Corners]	2	Print
Dark Bluish Gray	52038 Brick Special 2 x 4 - 1 x 4 with 2 Recessed Studs and Thick Side Arches	2	Print
Yellow	52501 Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed	2	Print
Red	57779 Crane Arm Outside, Wide with Pin Hole at Mid-Point	2	Print
White	6111 Brick 1 x 10	2	Print
Light Bluish Gray	6157 Plate Special 2 x 2 with Wheels Holder Wide	2	Print
White	6636 Tile 1 x 6 with Groove	2	Print
Black	2431 Tile 1 x 4 with Groove	1	Print
Black	2432 Tile Special 1 x 2 with Handle	1	Print
Black	2445 Plate 2 x 12	1	Print
Yellow	3002 Brick 2 x 3	1	Print
Yellow	3003 Brick 2 x 2	1	Print
Black	30043 Plate Special 1 x 4 with Bar Down	1	Print
Blue	3031 Plate 4 x 4	1	Print
Black	3035 Plate 4 x 8	1	Print
Red	30363 Brick Sloped 18° 4 x 2	1	Print
Black	32124 Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole	1	Print
Light Bluish Gray	32125 Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller)	1	Print
Black	3666 Plate 1 x 6	1	Print
Black	3706 Axle 6	1	Print
Yellow	3710 Plate 1 x 4	1	Print
Light Bluish Gray	3738 Plate 2 x 8 [7 Holes]	1	Print
Yellow	3821 Door 1 x 3 x 1 Right	1	Print
Yellow	3822 Door 1 x 3 x 1 Left	1	Print
White	3937 Hinge Brick 1 x 2 Base	1	Print
White	3943b Cone 4 x 4 x 2, Axle Hole [Plain]	1	Print
Black	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	1	Print
White	41769 Wedge Plate 4 x 2 Right	1	Print
White	41770 Wedge Plate 4 x 2 Left	1	Print
Black	4282 Plate 2 x 16	1	Print
Light Bluish Gray	43722 Wedge Plate 3 x 2 Right	1	Print
Light Bluish Gray	43723 Wedge Plate 3 x 2 Left	1	Print
White	47457 Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End	1	Print
Black	50450 Axle 32	1	Print
Dark Bluish Gray	55013 Axle 8 with Stop	1	Print
White	61068 Brick Curved 2 x 4 x 2/3 No Studs [No Bottom Tubes]	1	Print
Red	6134 Hinge Brick 2 x 2 Top Plate Thin	1	Print
Black	61485 Turntable 4 x 4 Square Base, Locking	1	Print
Light Bluish Gray	6553 Axle 1.5 with Perpendicular Axle Connector (Pole Reverser Handle)	1	Print
Yellow	32123b Bush 1/2 Smooth with Axle Hole Semi-Reduced	2 spare	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2 spare	Print
Black	2780 Pin with Friction Ridges Lengthwise and Center Slots	1 spare	Print
White	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
White	6014b Wheel 11 x 12 with Hole Notched for Wheels Holder Pin	16	Buy
Black	60700 Tyre 21 x 12 with Offset Tread Small Wide and Beveled Tread Edge	16	Buy
Trans-Orange	3069b Tile 1 x 2 with Groove	6	Buy
Trans-Orange	6141 Plate Round 1 x 1 with Solid Stud	5	Buy
Black	50745 Wheel Arch, Mudguard 4 x 2 1/2 x 2 with 2 x 2 Plate	4	Buy
White	50745 Wheel Arch, Mudguard 4 x 2 1/2 x 2 with 2 x 2 Plate	4	Buy
Trans-Red	6141 Plate Round 1 x 1 with Solid Stud	4	Buy
Trans-Yellow	3023 Plate 1 x 2	2	Buy
Light Bluish Gray	40620 Exhaust Pipe with Pin	2	Buy
Light Bluish Gray	4150pr0022 Tile Round 2 x 2 with Fine Mesh Grill Print	2	Buy
Red	50745 Wheel Arch, Mudguard 4 x 2 1/2 x 2 with 2 x 2 Plate	2	Buy
Trans-Clear	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Buy
Blue	970c28 Hips and Blue Legs	2	Buy
Trans-Brown	2437 Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top	1	Buy
Yellow	3829c01 Steering Stand 1 x 2 with Black Steering Wheel	1	Buy
Red	3829c01 Steering Stand 1 x 2 with Black Steering Wheel	1	Buy
Yellow	3899 Equipment Cup / Mug [Plain]	1	Buy
White	3900 Equipment Signal Paddle	1	Buy
Yellow	4079 Seat / Chair 2 x 2	1	Buy
Trans-Clear	4176 Windscreen 2 x 6 x 2, Wide Top	1	Buy
Trans-Brown	4865a Panel 1 x 2 x 1 [Square Corners]	1	Buy
White	52036 Vehicle Base 4 x 12 x 3/4 with 4 x 2 Recessed Center with Smooth Underside	1	Buy
Red	61484 Windscreen 5 x 6 x 2 Triple Curved Top Canopy with 4 Studs	1	Buy
[No Color/Any Color]	87250 Sticker Sheet for Set 7747-1	1	Buy
Yellow	3626bpr0314 Minifig Head Glasses with Brown Thin Eyebrows, Smile Print	1	Buy
Black	4485 Hat / Cap Long Peak [Plain]	1	Buy
Medium Blue	973c32h01pr1244 Torso, Mechanic Blue Overalls, Tools in Pocket Print, Plain Back, Medium Blue Arms, Yellow Hands	1	Buy
Yellow	3626bpr0270 Minifig Head with Orange Beard around Mouth, White Smile, White Pupils Print [Blocked Open Stud]	1	Buy
Red	4485 Hat / Cap Long Peak [Plain]	1	Buy
White	973c27h12pr1201 Torso, Overalls with Blue Stripes Print, White Arms, Dark Bluish Gray Hands	1	Buy
Trans-Orange	6141 Plate Round 1 x 1 with Solid Stud	3 spare	Buy
Trans-Red	6141 Plate Round 1 x 1 with Solid Stud	2 spare	Buy
Trans-Clear	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Buy

Print set 7747 at home

The set tool makes an STL file for each of the 358 printable pieces, sorted by colour, plus a shopping list for the 86 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.