Allied Avenger (6887): parts list and STL files
Set 6887, Allied Avenger, from 1991, has 100 pieces in 51 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
76 to print, 24 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 6887
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| Black | 4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening) | 7 | |
| White | 2412a Tile Special 1 x 2 Grille without Bottom Groove | 6 | |
| Black | 4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs | 6 | |
| Black | 3956 Bracket 2 x 2 - 2 x 2 | 5 | |
| Black | 2452 Hinge Plate 1 x 2 with 3 Fingers On Side | 4 | |
| White | 3023 Plate 1 x 2 | 4 | |
| Black | 4475 Wedge, Plate 8 x 8 with 4 x 4 Cutout | 4 | |
| Black | 2412a Tile Special 1 x 2 Grille without Bottom Groove | 3 | |
| Black | 3022 Plate 2 x 2 | 2 | |
| Black | 3023 Plate 1 x 2 | 2 | |
| White | 3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 2 | |
| Black | 3937 Hinge Brick 1 x 2 Base | 2 | |
| Black | 3940b Support Round 2 x 2 x 2 Stand with Reach-Through Center Hole | 2 | |
| White | 4070 Brick Special 1 x 1 with Headlight | 2 | |
| Black | 4085c Plate Special 1 x 1 with Clip Vertical [Thick U Clip] | 2 | |
| Black | 4275b Hinge Plate 1 x 2 with 3 Fingers [Hollow Studs] | 2 | |
| White | 4589 Cone 1 x 1 [No Top Groove] | 2 | |
| White | 2419 Wedge Plate 3 x 6 Cut Corners | 1 | |
| Black | 2434 Brick Special 2 x 4 x 2 with Studs on Sides | 1 | |
| Black | 3002 Brick 2 x 3 | 1 | |
| Black | 3004 Brick 1 x 2 | 1 | |
| White | 3007 Brick 2 x 8 | 1 | |
| Black | 3020 Plate 2 x 4 | 1 | |
| Black | 3021 Plate 2 x 3 | 1 | |
| Black | 3039 Brick Sloped 45° 2 x 2 | 1 | |
| White | 3298 Brick Sloped 33° 3 x 2 | 1 | |
| Black | 3298 Brick Sloped 33° 3 x 2 | 1 | |
| Black | 3700 Brick 1 x 2 [1 Pin Hole] | 1 | |
| Black | 3747a Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin | 1 | |
| White | 3747a Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin | 1 | |
| Black | 3795 Plate 2 x 6 | 1 | |
| Black | 3832 Plate 2 x 10 | 1 | |
| Black | 3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 1 | |
| White | 4591 Brick Round 2 x 2 x 2 with Axle Hole and Fins | 1 | |
| White | 4730 Brick Special 2 x 2 with Pin and No Axle Hole | 1 | |
| Black | 4859 Wedge Plate 3 x 4 without Stud Notches | 1 | |
| White | 4150pr0016 Tile Round 2 x 2 with Yellow Arrow with Black Border Print | 4 | Buy |
| Black | 3479 Tail 4 x 2 x 2 | 3 | Buy |
| Trans-Neon Green | 2418b Windscreen 6 x 6 Octagonal Canopy with Axle hole | 2 | Buy |
| Trans-Neon Green | 2569 Antenna 8H Whip | 2 | Buy |
| Black | 3959 Weapon Gun / Torch (Space) [with Grooves] | 2 | Buy |
| Black | 4229 Engine, Strakes, 2 x 2 Thin Top Plate | 2 | Buy |
| Trans-Neon Green | 2466 Panel 3 x 2 x 6 | 1 | Buy |
| Black | 2516 Tool Chainsaw / Drill Body | 1 | Buy |
| White | 3069bpr0036 Tile 1 x 2 with Arrow Short Yellow with Black Border Print | 1 | Buy |
| Black | 2446 Helmet, Standard | 1 | Buy |
| Trans-Neon Green | 2447 Headwear Accessory Visor For Standard Helmet | 1 | Buy |
| Yellow | 3626bpr0001 Minifig Head Standard Grin Print [Blocked Open Stud] | 1 | Buy |
| Black | 3838 Minifig Neckwear Airtanks | 1 | Buy |
| Black | 970c27 Hips and White Legs | 1 | Buy |
| White | 973c03h03pr0051 Torso, Blacktron II Logo Print, Black Arms and Hands | 1 | Buy |
Print set 6887 at home
The set tool makes an STL file for each of the 76 printable pieces, sorted by colour, plus a shopping list for the 24 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.