Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin (3747a): free STL file
A print file for part 3747a, Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin, ready for your 3D printer. Free, no account.
- Part number
- 3747a
- Name
- Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin
- Kind
- Bricks Sloped
- Size
- 16 × 24 × 11.2 mm
Opens the set tool with this part, where the STL is made on your own phone or computer.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
Used in these sets
The 30 sets that use it most, of 98 on Brickalike. Each set page has the full parts list and print files.
- 6987 Message Intercept Base × 9
- 6286 Skull's Eye Schooner × 7
- 5571 Giant Truck × 6
- 6339 Shuttle Launch Pad × 6
- 6542 Launch & Load Seaport × 6
- 6780 XT Starship × 6
- 1787 Crater Cruiser × 5
- 6891 Gamma V Laser Craft × 5
- 744 Universal Building Set × 5
- 6462 Aerial Recovery × 4
- 4555 Cargo Station × 4
- 4563 Load and Haul Railroad × 4
- 6988 Alpha Centauri Outpost × 4
- 7735 Freight Train × 4
- 6951 Robot Command Center × 4
- 6929 Star Fleet Voyager × 4
- 4888 Ocean Odyssey × 3
- 6484 F1 Hauler × 3
- 6396 International Jetport × 3
- 6285 Black Seas Barracuda × 3
- 6357 Stunt 'Copter N' Truck × 3
- 6931 FX Star Patroller × 3
- 6691 Red Cross Helicopter × 3
- 722 Universal Building Set × 3
- 733 Universal Building Set × 3
- 10182 Cafe Corner × 2
- 4886 Building Bonanza × 2
- 8466 4x4 Off Roader × 2
- 6479 Emergency Response Center × 2
- 1789 Star Hawk II × 2
Printing a whole set?
Type a set number in the set tool to get an STL for every printable part at once, sorted by colour, plus a shopping list for the rest.
Open the set toolPro adds print-ready plates for a 256 mm bed, in the set tool. About Pro
Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable. Browse all parts. Independent project, not sponsored, authorised or endorsed by any brick company.