Super Model Building Instruction (6861-2): parts list and STL files

Set 6861-2, Super Model Building Instruction, from 1993, has 178 pieces in 80 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Super Model Building Instruction, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Damien Roux (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

125to print

53to buy

1spares

80kinds

125 to print, 53 to buy, 1 spare. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 6861-2

Parts in set 6861-2, Super Model Building Instruction
Colour	Part	Qty	Print or buy
Black	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	7	Print
White	2412a Tile Special 1 x 2 Grille without Bottom Groove	6	Print
Black	2452 Hinge Plate 1 x 2 with 3 Fingers On Side	6	Print
Black	4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs	6	Print
Black	3795 Plate 2 x 6	5	Print
Black	3956 Bracket 2 x 2 - 2 x 2	5	Print
White	3023 Plate 1 x 2	4	Print
Black	3040b Brick Sloped 45° 2 x 1 with Bottom Pin	4	Print
Black	2412a Tile Special 1 x 2 Grille without Bottom Groove	3	Print
Black	3021 Plate 2 x 3	3	Print
Black	3039 Brick Sloped 45° 2 x 2	3	Print
Black	3660 Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]	3	Print
Black	3937 Hinge Brick 1 x 2 Base	3	Print
Black	4475 Wedge, Plate 8 x 8 with 4 x 4 Cutout	3	Print
Black	4730 Brick Special 2 x 2 with Pin and No Axle Hole	3	Print
Black	2434 Brick Special 2 x 4 x 2 with Studs on Sides	2	Print
White	2555 Tile Special 1 x 1 with Clip and Straight Tips	2	Print
Black	3004 Brick 1 x 2	2	Print
White	3004 Brick 1 x 2	2	Print
White	3005 Brick 1 x 1	2	Print
Black	3009 Brick 1 x 6	2	Print
Black	3022 Plate 2 x 2	2	Print
Black	3023 Plate 1 x 2	2	Print
Black	3298 Brick Sloped 33° 3 x 2	2	Print
Black	3666 Plate 1 x 6	2	Print
White	3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]	2	Print
White	4070 Brick Special 1 x 1 with Headlight	2	Print
Black	4085c Plate Special 1 x 1 with Clip Vertical [Thick U Clip]	2	Print
Black	4275b Hinge Plate 1 x 2 with 3 Fingers [Hollow Studs]	2	Print
White	4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs	2	Print
Black	4286 Brick Sloped 33° 3 x 1	2	Print
White	4589 Cone 1 x 1 [No Top Groove]	2	Print
Black	4590 Plate Special 1 x 4 Offset with Bar Holes	2	Print
White	6141 Plate Round 1 x 1 with Solid Stud	2	Print
White	2419 Wedge Plate 3 x 6 Cut Corners	1	Print
Black	2539 Plate Special 6 x 6 Octagonal with Square Hole and 4 Clips (Boat Mast Platform)	1	Print
Black	3002 Brick 2 x 3	1	Print
White	3007 Brick 2 x 8	1	Print
Black	3007 Brick 2 x 8	1	Print
Black	3010 Brick 1 x 4	1	Print
Black	3020 Plate 2 x 4	1	Print
White	3022 Plate 2 x 2	1	Print
White	3298 Brick Sloped 33° 3 x 2	1	Print
Black	3700 Brick 1 x 2 [1 Pin Hole]	1	Print
Black	3710 Plate 1 x 4	1	Print
Black	3747a Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin	1	Print
White	3747a Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin	1	Print
White	3795 Plate 2 x 6	1	Print
Black	3832 Plate 2 x 10	1	Print
Black	3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]	1	Print
Black	3933 Wedge Plate 8 x 4 Wing Left	1	Print
Black	3934 Wedge Plate 8 x 4 Wing Right with Stud Notch	1	Print
White	3938 Hinge Brick 1 x 2 Top Plate Thin	1	Print
Black	3940b Support Round 2 x 2 x 2 Stand with Reach-Through Center Hole	1	Print
White	4345b Box 2 x 2 x 2 [Hollow Studs]	1	Print
White	4591 Brick Round 2 x 2 x 2 with Axle Hole and Fins	1	Print
Black	4859 Wedge Plate 3 x 4 without Stud Notches	1	Print
Trans-Neon Green	2569 Antenna 8H Whip	4	Buy
Trans-Neon Green	6141 Plate Round 1 x 1 with Solid Stud	4	Buy
Trans-Neon Green	2466 Panel 3 x 2 x 6	3	Buy
Black	2593 Wheel Hard Plastic Medium (35mm D. x 31mm)	3	Buy
Black	3479 Tail 4 x 2 x 2	3	Buy
White	4150pr0016 Tile Round 2 x 2 with Yellow Arrow with Black Border Print	3	Buy
Black	2446 Helmet, Standard	3	Buy
Trans-Neon Green	2447 Headwear Accessory Visor For Standard Helmet	3	Buy
Yellow	3626bpr0001 Minifig Head Standard Grin Print [Blocked Open Stud]	3	Buy
Black	970c27 Hips and White Legs	3	Buy
White	973c03h03pr0051 Torso, Blacktron II Logo Print, Black Arms and Hands	3	Buy
Trans-Neon Green	2418b Windscreen 6 x 6 Octagonal Canopy with Axle hole	2	Buy
White	3069bpr0048 Tile 1 x 2 with Red and Yellow Control Panel Print (Original)	2	Buy
Black	3959 Weapon Gun / Torch (Space) [with Grooves]	2	Buy
Trans-Neon Green	3960 Dish 4 x 4 Inverted [Radar]	2	Buy
Black	4229 Engine, Strakes, 2 x 2 Thin Top Plate	2	Buy
Trans-Neon Green	4740 Dish 2 x 2 Inverted [Radar]	2	Buy
Black	3838 Minifig Neckwear Airtanks	2	Buy
Black	2516 Tool Chainsaw / Drill Body	1	Buy
White	3069bpr0036 Tile 1 x 2 with Arrow Short Yellow with Black Border Print	1	Buy
Black	4346pr0003 Box 2 x 2 x 2 Door with Slot and Controls Print	1	Buy
White	6023 Minifig Neckwear Jet Pack with Twin Handles	1	Buy
[No Color/Any Color]	120317 Instruction Manual, Blacktron Super Model	1 spare	Buy

Print set 6861-2 at home

The set tool makes an STL file for each of the 125 printable pieces, sorted by colour, plus a shopping list for the 53 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.