Aero Pod (4348): parts list and STL files
Set 4348, Aero Pod, from 2004, has 36 pieces in 27 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
27 to print, 9 to buy, 1 spare. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 4348
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| Black | 3022 Plate 2 x 2 | 2 | |
| Yellow | 3023 Plate 1 x 2 | 2 | |
| Yellow | 3710 Plate 1 x 4 | 2 | |
| Yellow | 4070 Brick Special 1 x 1 with Headlight | 2 | |
| Black | 4081b Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | 2 | |
| Yellow | 4286 Brick Sloped 33° 3 x 1 | 2 | |
| Yellow | 44302a Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth | 2 | |
| Yellow | 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 2 | |
| Yellow | 2460 Tile Special 2 x 2 with Top Pin | 1 | |
| Yellow | 3020 Plate 2 x 4 | 1 | |
| Dark Bluish Gray | 3021 Plate 2 x 3 | 1 | |
| Yellow | 3068b Tile 2 x 2 with Groove | 1 | |
| Yellow | 3747a Brick Sloped Inverted 33° 3 x 2, No Connections between Studs, Ovoid Bottom Pin | 1 | |
| Light Bluish Gray | 3839b Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 1 | |
| Yellow | 41862 Plate Special 2 x 2 with Grills | 1 | |
| Yellow | 43722 Wedge Plate 3 x 2 Right | 1 | |
| Yellow | 43723 Wedge Plate 3 x 2 Left | 1 | |
| Yellow | 47675 Pod, Top Cap 9 x 9 x 1 1/3 X-Pod | 1 | |
| Yellow | 47676 Pod, Bottom Cap 9 x 9 x 1 X-Pod | 1 | |
| Dark Bluish Gray | 3475b Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders] | 2 | Buy |
| Trans-Neon Orange | 6141 Plate Round 1 x 1 with Solid Stud | 2 | Buy |
| Trans-Clear | 3023 Plate 1 x 2 | 1 | Buy |
| Trans-Brown | 30602 Brick Curved 2 x 2 with Lip, No Studs | 1 | Buy |
| Yellow | 44661 Tail Shuttle - Small | 1 | Buy |
| Black | 4617b Propeller 3 Blade 5.5 Diameter with Hole for Pin | 1 | Buy |
| Trans-Clear | 47674 Pod, Center Barrel Section 10 x 10 x 3 1/3 X-Pod | 1 | Buy |
| Trans-Neon Orange | 6141 Plate Round 1 x 1 with Solid Stud | 1 spare | Buy |
Print set 4348 at home
The set tool makes an STL file for each of the 27 printable pieces, sorted by colour, plus a shopping list for the 9 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.