Motor Boat (1632): parts list and STL files
Set 1632, Motor Boat, from 1990, has 28 pieces in 23 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
24 to print, 4 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 1632
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| White | 3024 Plate 1 x 1 | 2 | |
| Red | 3024 Plate 1 x 1 | 2 | |
| White | 3666 Plate 1 x 6 | 2 | |
| Red | 3666 Plate 1 x 6 | 2 | |
| Black | 2412b Tile Special 1 x 2 Grille with Bottom Groove | 1 | |
| Black | 2433 Hinge Bar with 3 Fingers and End Stud (Control Lever) | 1 | |
| Red | 3003 Brick 2 x 2 | 1 | |
| Red | 3022 Plate 2 x 2 | 1 | |
| Black | 3023 Plate 1 x 2 | 1 | |
| Yellow | 3023 Plate 1 x 2 | 1 | |
| White | 3794a Plate Special 1 x 2 with 1 Stud without Groove (Jumper) | 1 | |
| White | 3937 Hinge Brick 1 x 2 Base | 1 | |
| White | 3938 Hinge Brick 1 x 2 Top Plate Thin | 1 | |
| Black | 4276b Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs | 1 | |
| White | 4854 Brick Sloped Inverted 45° 4 x 4 Double with 4 x 2 Recessed | 1 | |
| White | 4855 Brick Wedged, Sloped Inverted 4 x 4 Triple [2 Connections between Front Studs] | 1 | |
| White | 4859 Wedge Plate 3 x 4 without Stud Notches | 1 | |
| Red | 4859 Wedge Plate 3 x 4 without Stud Notches | 1 | |
| Red | 4865a Panel 1 x 2 x 1 [Square Corners] | 1 | |
| White | 4871 Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed | 1 | |
| White | 298c02 Lever Small Base with Black Lever | 2 | Buy |
| Trans-Light Blue | 2437 Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top | 1 | Buy |
| Black | 3829c01 Steering Stand 1 x 2 with Black Steering Wheel | 1 | Buy |
Print set 1632 at home
The set tool makes an STL file for each of the 24 printable pieces, sorted by colour, plus a shopping list for the 4 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.