Shuttle Adventure (10213): parts list and STL files

Set 10213, Shuttle Adventure, from 2010, has 1,204 pieces in 267 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Shuttle Adventure, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Edward Carman (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

1,092to print

112to buy

19spares

267kinds

1,092 to print, 112 to buy, 19 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 10213

Parts in set 10213, Shuttle Adventure
Colour	Part	Qty	Print or buy
White	6005 Brick Arch 1 x 3 x 2 Curved Top	50	Print
White	85080 Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]	40	Print
Black	2412b Tile Special 1 x 2 Grille with Bottom Groove	30	Print
Black	3023 Plate 1 x 2	27	Print
Dark Orange	2577 Brick Round Corner 4 x 4 Full Brick	24	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	20	Print
White	6259 Cylinder Half 2 x 4 x 4	20	Print
White	2420 Plate 2 x 2 Corner	18	Print
White	3023 Plate 1 x 2	18	Print
White	32000 Brick 1 x 2 [2 Pin Holes]	18	Print
Reddish Brown	4070 Brick Special 1 x 1 with Headlight	18	Print
Red	32062 Axle 2 Notched	17	Print
Black	3794b Plate Special 1 x 2 with 1 Stud with Groove (Jumper)	17	Print
White	3024 Plate 1 x 1	16	Print
Reddish Brown	3024 Plate 1 x 1	16	Print
White	3710 Plate 1 x 4	16	Print
Black	4070 Brick Special 1 x 1 with Headlight	16	Print
Reddish Brown	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	16	Print
White	3021 Plate 2 x 3	15	Print
Blue	4274 Pin 1/2 without Friction Ridges	15	Print
Dark Bluish Gray	2357 Brick 2 x 2 Corner	14	Print
White	3022 Plate 2 x 2	14	Print
Dark Orange	30562 Panel 4 x 4 x 6 Quarter Cylinder	12	Print
Dark Bluish Gray	30565 Plate Round Corner 4 x 4	12	Print
Reddish Brown	3700 Brick 1 x 2 [1 Pin Hole]	12	Print
Black	2780 Pin with Friction Ridges Lengthwise and Center Slots	11	Print
Black	59443 Axle Connector Smooth [with x Hole + Orientation]	11	Print
White	6019 Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]	11	Print
Light Bluish Gray	3001 Brick 2 x 4	10	Print
White	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	10	Print
White	6636 Tile 1 x 6 with Groove	10	Print
White	87087 Brick Special 1 x 1 with Stud on 1 Side	10	Print
White	3020 Plate 2 x 4	9	Print
White	3794b Plate Special 1 x 2 with 1 Stud with Groove (Jumper)	9	Print
White	62462 Pin Connector Round [Slotted]	9	Print
Light Bluish Gray	3004 Brick 1 x 2	8	Print
Black	3020 Plate 2 x 4	8	Print
White	3069b Tile 1 x 2 with Groove	8	Print
Dark Bluish Gray	33243 Brick Curved 1 x 3 x 2	8	Print
Blue	41677 Beam 1 x 2 Thin	8	Print
White	4477 Plate 1 x 10	8	Print
Light Bluish Gray	4740 Dish 2 x 2 Inverted [Radar]	8	Print
Dark Bluish Gray	48092 Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs	8	Print
Dark Orange	61678 Brick Curved 4 x 1 No Studs [Stud Holder with Asymmetric Ridges]	8	Print
White	60474 Plate Round 4 x 4 with Pin Hole	7	Print
White	3003 Brick 2 x 2	6	Print
Black	3021 Plate 2 x 3	6	Print
Black	3040b Brick Sloped 45° 2 x 1 with Bottom Pin	6	Print
Reddish Brown	3062b Brick Round 1 x 1 Open Stud	6	Print
White	3070b Tile 1 x 1 with Groove	6	Print
Tan	32556 Pin Long without Friction Ridges	6	Print
White	4162 Tile 1 x 8 with Groove	6	Print
Red	44728 Bracket 1 x 2 - 2 x 2	6	Print
Black	60474 Plate Round 4 x 4 with Pin Hole	6	Print
Light Bluish Gray	6141 Plate Round 1 x 1 with Solid Stud	6	Print
Light Bluish Gray	2432 Tile Special 1 x 2 with Handle	5	Print
Black	3005 Brick 1 x 1	5	Print
Black	3068b Tile 2 x 2 with Groove	5	Print
Black	32064b Brick 1 x 2 with Axle Hole Type 2 [X Opening]	5	Print
White	3666 Plate 1 x 6	5	Print
White	3795 Plate 2 x 6	5	Print
Black	60483 Beam 1 x 2 Thick with Pin Hole and Axle Hole	5	Print
White	2357 Brick 2 x 2 Corner	4	Print
Blue	2420 Plate 2 x 2 Corner	4	Print
White	3004 Brick 1 x 2	4	Print
Black	3022 Plate 2 x 2	4	Print
White	30256 Tile Special 2 x 2 with Bar and Stud	4	Print
Black	30504 Wedge Plate 8 x 8 Cut Corner	4	Print
Reddish Brown	3068b Tile 2 x 2 with Groove	4	Print
White	3068b Tile 2 x 2 with Groove	4	Print
Reddish Brown	3069b Tile 1 x 2 with Groove	4	Print
Black	3069b Tile 1 x 2 with Groove	4	Print
Reddish Brown	3070b Tile 1 x 1 with Groove	4	Print
Yellow	32123b Bush 1/2 Smooth with Axle Hole Semi-Reduced	4	Print
White	3460 Plate 1 x 8	4	Print
Light Bluish Gray	3623 Plate 1 x 3	4	Print
Dark Bluish Gray	3795 Plate 2 x 6	4	Print
Black	3941 Brick Round 2 x 2 with Axle Hole	4	Print
White	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	4	Print
White	4286 Brick Sloped 33° 3 x 1	4	Print
Black	4287b Brick Sloped Inverted 34° 3 x 1 with Internal Stopper	4	Print
Black	4865a Panel 1 x 2 x 1 [Square Corners]	4	Print
Red	59443 Axle Connector Smooth [with x Hole + Orientation]	4	Print
White	60470a Plate Special 1 x 2 with Clips Horizontal [Thick U-Clips]	4	Print
Black	60471 Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth	4	Print
Light Bluish Gray	60474 Plate Round 4 x 4 with Pin Hole	4	Print
Red	60478 Plate Special 1 x 2 with Handle on End [Closed Ends]	4	Print
White	6091 Brick Curved 1 x 2 x 1 1/3 with Curved Top	4	Print
Black	6134 Hinge Brick 2 x 2 Top Plate Thin	4	Print
Black	6222 Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole	4	Print
Blue	6558 Pin Long with Friction Ridges Lengthwise, 2 Center Slots	4	Print
White	87079 Tile 2 x 4 with Groove	4	Print
White	2436 Bracket 1 x 2 - 1 x 4 [Square Corners]	3	Print
White	3005 Brick 1 x 1	3	Print
Black	30145 Brick 2 x 2 x 3	3	Print
Dark Bluish Gray	3031 Plate 4 x 4	3	Print
Blue	32001 Plate 2 x 6 [5 Holes]	3	Print
Black	3705 Axle 4	3	Print
Black	3737 Axle 10	3	Print
White	3937 Hinge Brick 1 x 2 Base	3	Print
Dark Bluish Gray	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	3	Print
Blue	43093 Axle Pin with Friction Ridges Lengthwise	3	Print
White	4740 Dish 2 x 2 Inverted [Radar]	3	Print
Black	6233 Cone 3 x 3 x 2	3	Print
Black	6636 Tile 1 x 6 with Groove	3	Print
Dark Bluish Gray	85943 Brick 1 x 2 with Hole and Dual Beam Extensions	3	Print
Black	2420 Plate 2 x 2 Corner	2	Print
White	2449 Brick Sloped Inverted 75° 2 x 1 x 3	2	Print
Light Bluish Gray	2456 Brick 2 x 6	2	Print
Dark Bluish Gray	2540 Plate Special 1 x 2 Side Handle [Free Ends]	2	Print
White	2540 Plate Special 1 x 2 Side Handle [Free Ends]	2	Print
White	2730 Brick 1 x 10 [9 Pin Holes]	2	Print
Yellow	2921 Brick Special 1 x 1 with Handle	2	Print
Black	3002 Brick 2 x 3	2	Print
Light Bluish Gray	3003 Brick 2 x 2	2	Print
Reddish Brown	3003 Brick 2 x 2	2	Print
Black	3004 Brick 1 x 2	2	Print
Dark Blue	3021 Plate 2 x 3	2	Print
Yellow	3023 Plate 1 x 2	2	Print
White	3039 Brick Sloped 45° 2 x 2	2	Print
White	30504 Wedge Plate 8 x 8 Cut Corner	2	Print
White	32013 Axle and Pin Connector Angled #1	2	Print
Black	32013 Axle and Pin Connector Angled #1	2	Print
Black	32034 Axle and Pin Connector Angled #2 - 180°	2	Print
Light Bluish Gray	32073 Axle 5	2	Print
Blue	32140 Beam 2 x 4 L-Shape Thick	2	Print
Dark Bluish Gray	32526 Beam 3 x 5 L-Shape Thick	2	Print
Light Bluish Gray	3298 Brick Sloped 33° 3 x 2	2	Print
Light Bluish Gray	3460 Plate 1 x 8	2	Print
White	3622 Brick 1 x 3	2	Print
Black	3623 Plate 1 x 3	2	Print
White	3659 Brick Arch 1 x 4	2	Print
Black	3666 Plate 1 x 6	2	Print
Dark Bluish Gray	3684 Brick Sloped 75° 2 x 2 x 3 [Hollow Studs]	2	Print
Black	3710 Plate 1 x 4	2	Print
Red	3713 Bush	2	Print
Black	3795 Plate 2 x 6	2	Print
Black	3832 Plate 2 x 10	2	Print
White	3894 Brick 1 x 6 [5 Pin Holes]	2	Print
White	3941 Brick Round 2 x 2 with Axle Hole	2	Print
Black	3942c Cone 2 x 2 x 2, Open Stud	2	Print
White	3942c Cone 2 x 2 x 2, Open Stud	2	Print
White	3943b Cone 4 x 4 x 2, Axle Hole [Plain]	2	Print
Black	3956 Bracket 2 x 2 - 2 x 2	2	Print
Red	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	2	Print
Black	4081b Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]	2	Print
Blue	4085c Plate Special 1 x 1 with Clip Vertical [Thick U Clip]	2	Print
Light Bluish Gray	4162 Tile 1 x 8 with Groove	2	Print
Dark Orange	41747 Brick Wedged, Curved 6 x 2 Right, Inner Ridges	2	Print
Dark Orange	41748 Brick Wedged, Curved 6 x 2 Left, Inner Ridges	2	Print
Black	4282 Plate 2 x 16	2	Print
Black	4286 Brick Sloped 33° 3 x 1	2	Print
White	43337 Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]	2	Print
Light Bluish Gray	44568 Hinge Plate 1 x 4 Locking Dual 1 Finger	2	Print
Black	4477 Plate 1 x 10	2	Print
Black	47397 Wedge Plate 12 x 3 Left	2	Print
White	47397 Wedge Plate 12 x 3 Left	2	Print
Black	47398 Wedge Plate 12 x 3 Right	2	Print
White	47398 Wedge Plate 12 x 3 Right	2	Print
Black	4742 Cone 4 x 4 x 2 Hollow No Studs	2	Print
Black	50303 Wedge Plate 7 x 6 Boat Bow with Stud Notches	2	Print
Black	50450 Axle 32	2	Print
Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Print
White	59900 Cone 1 x 1 [Top Groove]	2	Print
Black	60477 Brick Sloped 18° 4 x 1	2	Print
Black	60479 Plate 1 x 12	2	Print
Light Bluish Gray	60479 Plate 1 x 12	2	Print
White	6112 Brick 1 x 12	2	Print
Black	6231 Panel 1 x 1 x 1 Corner	2	Print
Dark Tan	6587 Axle 3 with Stud	2	Print
Dark Bluish Gray	87083 Axle 4 with Stop	2	Print
White	87544 Panel 1 x 2 x 3 [Side Supports / Hollow Studs]	2	Print
Dark Bluish Gray	2654 Plate Round 2 x 2 with Rounded Bottom [Boat Stud]	1	Print
White	3010 Brick 1 x 4	1	Print
Black	3032 Plate 4 x 6	1	Print
White	3032 Plate 4 x 6	1	Print
Light Bluish Gray	3036 Plate 6 x 8	1	Print
White	30363 Brick Sloped 18° 4 x 2	1	Print
Black	30363 Brick Sloped 18° 4 x 2	1	Print
Black	3070b Tile 1 x 1 with Groove	1	Print
White	32014 Axle and Pin Connector Angled #6 - 90°	1	Print
Black	32124 Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole	1	Print
White	3623 Plate 1 x 3	1	Print
Black	3707 Axle 8	1	Print
Blue	3709 Plate 2 x 4 [3 Holes]	1	Print
Red	3938 Hinge Brick 1 x 2 Top Plate Thin	1	Print
Black	3958 Plate 6 x 6	1	Print
Dark Bluish Gray	3961 Dish 8 x 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside	1	Print
White	41769 Wedge Plate 4 x 2 Right	1	Print
Black	41769 Wedge Plate 4 x 2 Right	1	Print
Black	41770 Wedge Plate 4 x 2 Left	1	Print
White	41770 Wedge Plate 4 x 2 Left	1	Print
White	4287b Brick Sloped Inverted 34° 3 x 1 with Internal Stopper	1	Print
White	43722 Wedge Plate 3 x 2 Right	1	Print
White	43723 Wedge Plate 3 x 2 Left	1	Print
White	43898 Dish 3 x 3 Inverted [Radar]	1	Print
Dark Bluish Gray	43898 Dish 3 x 3 Inverted [Radar]	1	Print
Light Bluish Gray	4519 Axle 3	1	Print
Black	47455 Rotation Joint Ball Loop with Two Perpendicular Pins with Friction	1	Print
Dark Bluish Gray	48171 Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side]	1	Print
Black	54383 Wedge Plate 6 x 3 Right	1	Print
Black	54384 Wedge Plate 6 x 3 Left	1	Print
Dark Bluish Gray	59426 Axle 5.5 with Stop [Rounded Short End]	1	Print
Light Bluish Gray	61184 Pin 1/2 with 2L Bar Extension	1	Print
Black	88072 Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]	1	Print
Black	2780 Pin with Friction Ridges Lengthwise and Center Slots	1 spare	Print
White	3070b Tile 1 x 1 with Groove	1 spare	Print
Reddish Brown	3070b Tile 1 x 1 with Groove	1 spare	Print
Black	3070b Tile 1 x 1 with Groove	1 spare	Print
Yellow	32123b Bush 1/2 Smooth with Axle Hole Semi-Reduced	1 spare	Print
Red	3713 Bush	1 spare	Print
Blue	4274 Pin 1/2 without Friction Ridges	1 spare	Print
White	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Reddish Brown	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Light Bluish Gray	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Print
Trans-Neon Orange	6141 Plate Round 1 x 1 with Solid Stud	22	Buy
White	4624 Wheel 8 x 6	10	Buy
Trans-Clear	6141 Plate Round 1 x 1 with Solid Stud	9	Buy
Trans-Brown	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	6	Buy
Black	59895 Tyre 14 x 4 Smooth Small Single [New Style]	6	Buy
Yellow	4599b Tap 1 x 1 without Hole in Spout	4	Buy
Black	87414 Tyre 15 x 6 Offset Tread Small with Band around Center	4	Buy
Trans-Light Blue	30292 Flag 7 x 3 with Rod	2	Buy
Light Bluish Gray	3069bpr0086 Tile 1 x 2 with Stylised Computer Console Print	2	Buy
Black	4083 Bar 1 x 4 x 2 with Studs	2	Buy
Dark Orange	45705 Windscreen 10 x 6 x 2 Curved	2	Buy
Light Bluish Gray	4870 Wheel Holder 2 x 2 Thin with Split Wheel Clip Pins	2	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Buy
Dark Blue	60212 Wheel Arch, Mudguard 2 x 4 Studded with Hole	2	Buy
Light Bluish Gray	6140 Bar 1 x 6 [Closed Studs]	2	Buy
Yellow	76537 Shock Absorber 6.5L with Hard Spring, Tight Coil in Middle [Complete Assembly]	2	Buy
White	89762 Windscreen 7 x 4 x 2 Round Extended Front Edge	2	Buy
White	2446 Helmet, Standard	2	Buy
Metallic Gold	2447 Headwear Accessory Visor For Standard Helmet	2	Buy
White	970c27 Hips and White Legs	2	Buy
White	973c27h27pr1655 Torso, Shuttle Adventure Logo and Equipment with 'AEJ-581', Front and Back Print, White Arms and Hands	2	Buy
Black	2441 Vehicle Base 4 x 7 x 2/3 with 3 x 4 Recessed, Wheel Pins	1	Buy
Black	2569 Antenna 8H Whip	1	Buy
Light Bluish Gray	298c02 Lever Small Base with Black Lever	1	Buy
White	30361c Brick Round 2 x 2 x 2 Robot Body, Axle Holder '+' Orientation	1	Buy
Yellow	30374 Bar 4L (Lightsaber Blade / Wand)	1	Buy
Trans-Red	3062b Brick Round 1 x 1 Open Stud	1	Buy
Trans-Brown	3069b Tile 1 x 2 with Groove	1	Buy
Light Bluish Gray	3069bpr0020 Tile 1 x 2 with Video Tape and Reels Print	1	Buy
White	3069bpr0030 Tile 1 x 2 with Computer Keyboard Standard Print	1	Buy
Light Bluish Gray	3069bpr0101 Tile 1 x 2 with Red 82, Yellow and White Gauges Print	1	Buy
Light Bluish Gray	3829c01 Steering Stand 1 x 2 with Black Steering Wheel	1	Buy
Dark Bluish Gray	3857 Baseplate 16 x 32	1	Buy
Light Bluish Gray	3957a Antenna 1 x 4 with Rounded Top	1	Buy
Light Bluish Gray	4150pr0022 Tile Round 2 x 2 with Fine Mesh Grill Print	1	Buy
Black	4360 Equipment Camera with Side Sight [aka Space Gun]	1	Buy
Light Bluish Gray	61483 Pin with Dual Wheels Holder	1	Buy
[No Color/Any Color]	91551 Sticker Sheet for Set 10213-1	1	Buy
Yellow	3626bpr0495 Minifig Head, Brown Eyebrows Scared / Smiling Print [Blocked Open Stud]	1	Buy
Yellow	3626bpr0387 Minifig Head, Brown Eyebrows, Thin Grin, Black Eyes with White Pupils Print	1	Buy
Yellow	3626bpr0389 Minifig Head, Smirk, Pupils, Stubble Beard and Moustache and Sideburns Print	1	Buy
Blue	86035 Hat / Cap Short Curved Peak	1	Buy
Blue	970c28 Hips and Blue Legs	1	Buy
Blue	973c28h01pr1240 Torso, Jacket, Light Blue Tie, Red Pen, Silver Plane Logo, 3 Buttons Print, Blue Arms, Yellow Hands	1	Buy
Trans-Neon Orange	6141 Plate Round 1 x 1 with Solid Stud	2 spare	Buy
Metallic Gold	2447 Headwear Accessory Visor For Standard Helmet	1 spare	Buy
Light Bluish Gray	298c02 Lever Small Base with Black Lever	1 spare	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Buy
Trans-Brown	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Buy
Trans-Clear	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Buy

Print set 10213 at home

The set tool makes an STL file for each of the 1,092 printable pieces, sorted by colour, plus a shopping list for the 112 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.