Yellow/Black Racer (7453): parts list and STL files

Set 7453, Yellow/Black Racer, from 2007, has 26 pieces in 16 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Yellow/Black Racer, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Massimo Maso (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

14to print

12to buy

1spares

16kinds

14 to print, 12 to buy, 1 spare. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 7453

Parts in set 7453, Yellow/Black Racer
Colour	Part	Qty	Print or buy
Yellow	3002 Brick 2 x 3	2	Print
Dark Bluish Gray	3068b Tile 2 x 2 with Groove	2	Print
Dark Bluish Gray	50950 Brick Curved 3 x 1 No Studs	2	Print
Black	6157 Plate Special 2 x 2 with Wheels Holder Wide	2	Print
Metallic Silver	2412b Tile Special 1 x 2 Grille with Bottom Groove	1	Print
Black	2456 Brick 2 x 6	1	Print
Black	3020 Plate 2 x 4	1	Print
Black	3022 Plate 2 x 2	1	Print
Dark Bluish Gray	30236 Brick Special 1 x 2 with Handle	1	Print
Dark Bluish Gray	3069b Tile 1 x 2 with Groove	1	Print
White	6014b Wheel 11 x 12 with Hole Notched for Wheels Holder Pin	4	Buy
Black	6015 Tyre 21 x 12 with Offset Tread Small Wide	4	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Buy
Yellow	3788 Wheel Arch, Mudguard 2 x 4 Studded	1	Buy
Yellow	44674 Mudguard 2 x 4 with Molded Headlights	1	Buy
Trans-Red	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Buy

Print set 7453 at home

The set tool makes an STL file for each of the 14 printable pieces, sorted by colour, plus a shopping list for the 12 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.