Mini Digger (5761): parts list and STL files

Set 5761, Mini Digger, from 2011, has 57 pieces in 32 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Mini Digger, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Takeshi Takahashi (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

37to print

20to buy

6spares

32kinds

37 to print, 20 to buy, 6 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 5761

Parts in set 5761, Mini Digger
Colour	Part	Qty	Print or buy
Dark Bluish Gray	2540 Plate Special 1 x 2 Side Handle [Free Ends]	4	Print
Yellow	4081b Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]	4	Print
Dark Bluish Gray	3022 Plate 2 x 2	3	Print
Yellow	3176 Plate Special 3 x 2 with Rounded End, Hole	3	Print
Black	3020 Plate 2 x 4	2	Print
Yellow	3021 Plate 2 x 3	2	Print
Dark Bluish Gray	3062b Brick Round 1 x 1 Open Stud	2	Print
Yellow	32028 Plate Special 1 x 2 with Door Rail	2	Print
Light Bluish Gray	4600 Plate Special 2 x 2 with Wheel Holders	2	Print
Yellow	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	2	Print
Black	61409 Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate	2	Print
Dark Bluish Gray	6141 Plate Round 1 x 1 with Solid Stud	2	Print
Black	6231 Panel 1 x 1 x 1 Corner	2	Print
Yellow	2436 Bracket 1 x 2 - 1 x 4 [Square Corners]	1	Print
Dark Bluish Gray	3710 Plate 1 x 4	1	Print
Light Bluish Gray	4274 Pin 1/2 without Friction Ridges	1	Print
Black	4865a Panel 1 x 2 x 1 [Square Corners]	1	Print
Dark Bluish Gray	88072 Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]	1	Print
Light Bluish Gray	4274 Pin 1/2 without Friction Ridges	1 spare	Print
Yellow	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Dark Bluish Gray	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Print
Light Bluish Gray	6014b Wheel 11 x 12 with Hole Notched for Wheels Holder Pin	4	Buy
Black	87697 Tyre 21 x 12 with Offset Tread Small Wide and Center Band	4	Buy
Trans-Orange	6141 Plate Round 1 x 1 with Solid Stud	3	Buy
Trans-Brown	3065 Brick 1 x 2 without Bottom Tube	2	Buy
Trans-Yellow	3070b Tile 1 x 1 with Groove	2	Buy
Black	4735 Bar 1 x 3 [Clip / Anti-Stud]	2	Buy
Trans-Red	6141 Plate Round 1 x 1 with Solid Stud	2	Buy
Yellow	44674 Mudguard 2 x 4 with Molded Headlights	1	Buy
Trans-Yellow	3070b Tile 1 x 1 with Groove	1 spare	Buy
Trans-Red	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Buy
Trans-Orange	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Buy

Print set 5761 at home

The set tool makes an STL file for each of the 37 printable pieces, sorted by colour, plus a shopping list for the 20 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.