Giraffe (4905): parts list and STL files

Set 4905, Giraffe, from 2005, has 39 pieces in 17 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Giraffe, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Merlijn Wissink (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

39to print

0to buy

0spares

17kinds

39 to print, 0 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 4905

Parts in set 4905, Giraffe
Colour	Part	Qty	Print or buy
Reddish Brown	3005 Brick 1 x 1	8	Print
Tan	3004 Brick 1 x 2	4	Print
Tan	3794a Plate Special 1 x 2 with 1 Stud without Groove (Jumper)	4	Print
Tan	3022 Plate 2 x 2	3	Print
Tan	44302a Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth	3	Print
Tan	3005 Brick 1 x 1	2	Print
Tan	3660 Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]	2	Print
Reddish Brown	44301a Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove	2	Print
Tan	4589 Cone 1 x 1 [No Top Groove]	2	Print
Tan	49668 Plate Special 1 x 1 with Tooth	2	Print
Reddish Brown	3020 Plate 2 x 4	1	Print
Reddish Brown	3023 Plate 1 x 2	1	Print
Tan	3023 Plate 1 x 2	1	Print
Tan	3039 Brick Sloped 45° 2 x 2	1	Print
Reddish Brown	3710 Plate 1 x 4	1	Print
Tan	41855 Brick Curved 2 x 2 x 2/3 Two Studs and Lip End	1	Print
Tan	44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove	1	Print

Print set 4905 at home

The set tool makes an STL file for each of the 39 printable pieces, sorted by colour, plus a shopping list for the 0 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.