Orange Racer (4310): parts list and STL files

Set 4310, Orange Racer, from 2004, has 25 pieces in 17 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Orange Racer, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Massimo Maso (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

15to print

10to buy

1spares

17kinds

15 to print, 10 to buy, 1 spare. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 4310

Parts in set 4310, Orange Racer
Colour	Part	Qty	Print or buy
Red	6141 Plate Round 1 x 1 with Solid Stud	4	Print
Red	3710 Plate 1 x 4	2	Print
Red	4081b Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]	2	Print
Black	2412b Tile Special 1 x 2 Grille with Bottom Groove	1	Print
Orange	3022 Plate 2 x 2	1	Print
Black	30602 Brick Curved 2 x 2 with Lip, No Studs	1	Print
Black	30603 Brick Sloped 2 x 2 No Studs, with 3 Side Pistons Raised Edges	1	Print
Dark Bluish Gray	3795 Plate 2 x 6	1	Print
Light Bluish Gray	4600 Plate Special 2 x 2 with Wheel Holders	1	Print
Dark Bluish Gray	6157 Plate Special 2 x 2 with Wheels Holder Wide	1	Print
Red	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Print
Red	30027b Wheel 8 x 9 with Hole Notched for Wheels Holder Pin	2	Buy
Black	30028 Tyre 14 x 9 Smooth Small Wide Slick	2	Buy
Red	6014b Wheel 11 x 12 with Hole Notched for Wheels Holder Pin	2	Buy
Black	6015 Tyre 21 x 12 with Offset Tread Small Wide	2	Buy
Orange	41854pr0002 Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings, White Stripe and Red Fade Print	1	Buy
Orange	44674 Mudguard 2 x 4 with Molded Headlights	1	Buy

Print set 4310 at home

The set tool makes an STL file for each of the 15 printable pieces, sorted by colour, plus a shopping list for the 10 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.