Jet-Car (3501): parts list and STL files
Set 3501, Jet-Car, from 1998, has 26 pieces in 8 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.
Get the free print filesFree: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
See the finished set (photo) on Rebrickable ↗
Buy the real set on Amazon ↗ We may earn a commission if you buy.
4 to print, 22 to buy, 0 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.
Every part in set 3501
| Colour | Part | Qty | Print or buy |
|---|---|---|---|
| Light Gray | 3749 Axle Pin without Friction Ridges Lengthwise | 4 | |
| Dark Gray | 32207 Crank Connector 1 x 2 x 3 | 4 | Buy |
| Purple | 32211 Connector 3 x 3 - 4 way B (Beam) | 4 | Buy |
| Light Gray | 32212 Connector 1 x 3 - 2 way A | 4 | Buy |
| Yellow | 32219 Wheel 32mm Propeller | 4 | Buy |
| Black | 32208 Beam 16, 9 Holes, 5 Bends | 2 | Buy |
| Yellow | 32210 Beam 3, 1 Hole | 2 | Buy |
| Black | 32214 Beam 9, 8 Holes, Triangular | 2 | Buy |
Print set 3501 at home
The set tool makes an STL file for each of the 4 printable pieces, sorted by colour, plus a shopping list for the 22 to buy. Free, no account, and it runs on your own phone or computer.
Get the free print filesPro adds print-ready plates for a 256 mm bed. About Pro
Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.