Wreath (30028): parts list and STL files

Set 30028, Wreath, from 2011, has 50 pieces in 14 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Wreath, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Takeshi Takahashi (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

50to print

0to buy

2spares

14kinds

50 to print, 0 to buy, 2 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 30028

Parts in set 30028, Wreath
Colour	Part	Qty	Print or buy
Green	3022 Plate 2 x 2	7	Print
Green	3039 Brick Sloped 45° 2 x 2	7	Print
Green	48336 Plate Special 1 x 2 [Side Handle Closed Ends]	7	Print
Green	60470b Plate Special 1 x 2 with Clips Horizontal [Open O Clips]	7	Print
Red	6141 Plate Round 1 x 1 with Solid Stud	6	Print
Yellow	4032a Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)	4	Print
Green	3024 Plate 1 x 1	2	Print
Yellow	30367b Brick Round 2 x 2 Dome Top, Blocked Open Stud, Bottom Axle Holder	2	Print
Yellow	43898 Dish 3 x 3 Inverted [Radar]	2	Print
Yellow	48336 Plate Special 1 x 2 [Side Handle Closed Ends]	2	Print
Black	48729b Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]	2	Print
Yellow	60470b Plate Special 1 x 2 with Clips Horizontal [Open O Clips]	2	Print
Black	48729b Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]	1 spare	Print
Red	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Print

Print set 30028 at home

The set tool makes an STL file for each of the 50 printable pieces, sorted by colour, plus a shopping list for the 0 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.