Clown Fish (30025): parts list and STL files

Set 30025, Clown Fish, from 2011, has 59 pieces in 28 kinds of part and colour. Here is every part, with the ones you can 3D print at home and the ones to buy.

Get the free print files

Free: an STL file for every part you can print, the parts list and a BrickLink shopping list for the rest. Pro adds print-ready plates for a 256 mm bed and our printing guide. About ProYour Pro includes the print-ready plates.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Clown Fish, built (3D picture) — What it looks like built. A 3D picture, not a photo, made from the LDraw model by Takeshi Takahashi (CC BY 2.0).

See the finished set (photo) on Rebrickable ↗

Buy the real set on Amazon ↗ We may earn a commission if you buy.

56to print

3to buy

2spares

28kinds

56 to print, 3 to buy, 2 spares. Print: plain bricks, plates and beams you can make on a home 3D printer. Buy: clear, printed, rubber, electric and very thin parts, which are better ordered. Spares are the extras in the box.

Every part in set 30025

Parts in set 30025, Clown Fish
Colour	Part	Qty	Print or buy
Orange	3004 Brick 1 x 2	5	Print
White	3004 Brick 1 x 2	4	Print
Orange	3023 Plate 1 x 2	4	Print
Orange	3024 Plate 1 x 1	4	Print
Black	6019 Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]	4	Print
Black	60478 Plate Special 1 x 2 with Handle on End [Closed Ends]	4	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	3	Print
Black	3021 Plate 2 x 3	2	Print
Black	3023 Plate 1 x 2	2	Print
Black	3040b Brick Sloped 45° 2 x 1 with Bottom Pin	2	Print
Black	3665 Brick Sloped Inverted 45° 2 x 1	2	Print
Orange	4085c Plate Special 1 x 1 with Clip Vertical [Thick U Clip]	2	Print
Orange	43722 Wedge Plate 3 x 2 Right	2	Print
Orange	43723 Wedge Plate 3 x 2 Left	2	Print
White	4740 Dish 2 x 2 Inverted [Radar]	2	Print
Black	6141 Plate Round 1 x 1 with Solid Stud	2	Print
White	87087 Brick Special 1 x 1 with Stud on 1 Side	2	Print
White	87580 Plate Special 2 x 2 with Groove and Center Stud (Jumper)	2	Print
Black	2654 Plate Round 2 x 2 with Rounded Bottom [Boat Stud]	1	Print
Orange	3021 Plate 2 x 3	1	Print
Orange	3039 Brick Sloped 45° 2 x 2	1	Print
Orange	3298 Brick Sloped 33° 3 x 2	1	Print
Orange	3747b Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin	1	Print
Black	4286 Brick Sloped 33° 3 x 1	1	Print
Black	54200 Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)	1 spare	Print
Black	6141 Plate Round 1 x 1 with Solid Stud	1 spare	Print
White	30237b Brick Special 1 x 2 with Vertical Clip [Open O Clip]	2	Buy
White	30374 Bar 4L (Lightsaber Blade / Wand)	1	Buy

Print set 30025 at home

The set tool makes an STL file for each of the 56 printable pieces, sorted by colour, plus a shopping list for the 3 to buy. Free, no account, and it runs on your own phone or computer.

Get the free print files

Pro adds print-ready plates for a 256 mm bed. About Pro

Parts data: Rebrickable, and it can differ slightly from your box. Part shapes: LDraw Parts Library (CC BY 4.0). Browse all sets. Independent project, not sponsored, authorised or endorsed by any brick company.