Changeover Catch - + opening (6641): free STL file
A print file for part 6641, Changeover Catch - + opening, ready for your 3D printer. Free, no account.
- Part number
- 6641
- Name
- Changeover Catch - + opening
- Kind
- Pin and axle parts, special
- Size
- 8 × 20.8 × 7.2 mm
Opens the set tool with this part, where the STL is made on your own phone or computer.
Need filament? Find PLA on Amazon. We may earn a commission if you buy.
Used in these sets
22 sets on Brickalike. Each set page has the full parts list and print files.
- 42070 6x6 All Terrain Tow Truck × 4
- 42055 Bucket Wheel Excavator × 4
- 42066 Air Race Jet × 2
- 42052 Heavy Lift Helicopter × 2
- 42042 Crawler Crane × 2
- 42006 Excavator × 2
- 9396 Helicopter × 2
- 9397 Logging Truck × 2
- 8258 Crane Truck × 2
- 8464 Pneumatic Front End Loader × 2
- 42094 Tracked Loader × 1
- 42068 Airport Rescue Vehicle × 1
- 42048 Race Kart × 1
- 42038 Arctic Truck × 1
- 42039 24 Hours Race Car × 1
- 42024 Container Truck × 1
- 42029 Customized Pick up Truck × 1
- 42000 Grand Prix Racer × 1
- 9395 Pick-Up Tow Truck × 1
- 8063 Tractor with Trailer × 1
- 8466 4x4 Off Roader × 1
- 8448 Super Street Sensation × 1
Printing a whole set?
Type a set number in the set tool to get an STL for every printable part at once, sorted by colour, plus a shopping list for the rest.
Open the set toolPro adds print-ready plates for a 256 mm bed, in the set tool. About Pro
Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable. Browse all parts. Independent project, not sponsored, authorised or endorsed by any brick company.