BrickalikePRO
Part 41529, Hinge 1 x 3 Locking with 2 Fingers and Claw End, 9 Teeth (3D picture of the print file)

Hinge 1 x 3 Locking with 2 Fingers and Claw End, 9 Teeth (41529): free STL file

A print file for part 41529, Hinge 1 x 3 Locking with 2 Fingers and Claw End, 9 Teeth, ready for your 3D printer. Free, no account.

Part number
41529
Name
Hinge 1 x 3 Locking with 2 Fingers and Claw End, 9 Teeth
Kind
Hinges, Arms and Turntables
Size
22.4 × 11.2 × 11.2 mm
Download the free STL

Opens the set tool with this part, where the STL is made on your own phone or computer.

Need filament? Find PLA on Amazon. We may earn a commission if you buy.

Used in these sets

1 set on Brickalike. Each set page has the full parts list and print files.

Printing a whole set?

Type a set number in the set tool to get an STL for every printable part at once, sorted by colour, plus a shopping list for the rest.

Open the set tool

Pro adds print-ready plates for a 256 mm bed, in the set tool. About Pro

Part shape: LDraw Parts Library (CC BY 4.0). Parts data: Rebrickable. Browse all parts. Independent project, not sponsored, authorised or endorsed by any brick company.